John Deere 5200 (A) vs Steyr 8060 (a)

12 material differences

Tractor one

1992–1997

No measured PTO figure

Tractor two

1979–1992

No measured PTO figure

Which should you choose?

Read our verdict on the 5200 (A) and the 8060 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

John Deere 5200 (A) and Steyr 8060 (a), field by field
Field	5200 (A)	8060 (a)	Gap
Engine
Engine power, claimed claimed	39.4 hp	47.3 hp	+20% 8060 (a)
Engine declared	John Deere 3.029	Steyr WD-311.41 or WD-311.87	differs
Displacement declared	2.94 L	2.59 L	+14% 5200 (A)
Maximum torque declared	115 lb·ft · 156 N·m	—	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry CARRARO single-disc clutch	Dry Fichtel & Sachs double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	11.8 gpm · 44.7 L/min	6.4 gpm · 24.1 L/min	+85% 5200 (A)
Pressure declared	3,408 psi · 235 bar	3,553 psi · 245 bar	—
Three-point lift at ends declared	3,803 lb · 1,725 kg	4,850 lb · 2,200 kg	+28% 8060 (a)
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	4,248 lb · 1,927 kg	5,335 lb · 2,420 kg	+26% 8060 (a)
Wheelbase declared	80.7 in · 2,050 mm	80.1 in · 2,035 mm	—
Length declared	139.4 in · 3,541 mm	137.6 in · 3,495 mm	—
Width declared	72.7 in · 1,846 mm	67.3 in · 1,710 mm	+8% 5200 (A)
Height declared	90.1 in · 2,289 mm	92.9 in · 2,360 mm	—
Ground clearance declared	19.3 in · 490 mm	14.2 in · 360 mm	+36% 5200 (A)
Turning radius, braked declared	9.8 ft · 3.00 m	10.6 ft · 3.24 m	+8% 8060 (a)
Fuel tank declared	72.0 qt · 68.1 L	101.4 qt · 96.0 L	+41% 8060 (a)

Source

Source