9 material differences · fewer than 12

Tractor oneJohn Deere 4760 (A)1992–1994No measured PTO figureTractor twoSteyr-Case 9200 a1997–1999No measured PTO figure

Which should you choose?

We will not advise between these two machines, because the drive differs (Two-wheel or four-wheel drive; 4WD); they were not built in overlapping years (1992–1994; 1997–1999). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

9 material differences · 4 fields identical or within 5%, which is not counted as material

John Deere 4760 (A) and Steyr-Case 9200 a, field by field
Field4760 (A)9200 aGap
Engine
Engine power, claimed claimed187.5 hp187.5 hp—
Engine declaredJohn Deere 6.076 TRW-07CASE-IH 6T-830differs
Displacement declared7.63 L8.27 L+8% 9200 a
Maximum torque declared—583 lb·ft · 790 N·m—
Transmission
Top speed declared18.6 mph · 30 km/h18.6–24.9 mph · 30–40 km/hdiffers
Clutch declaredPedal-operated, hydraulic and oil-cooled multi-plate clutchPedal operated hydraulic wet CASE-IH multi-disc clutchdiffers
Hydraulics & hitch
Hydraulic centre declaredClosed centre——
Pump flow declared—30.4 gpm · 115.1 L/min—
Pressure declared—2,944 psi · 203 bar—
Rear PTO speeds declared1000 rpm540/1000 rpmdiffers
Weight & dimensions
Unladen weight declared16,030 lb · 7,271 kg17,419 lb · 7,901 kg+9% 9200 a
Wheelbase declared118.5 in · 3,010 mm118.3 in · 3,006 mm—
Length declared213.4 in · 5,420 mm198.8 in · 5,049 mm+7% 4760 (A)
Width declared118.0 in · 2,997 mm112.0–123.1 in · 2,845–3,128 mmdiffers
Height, over the cab declared118.9 in · 3,020 mm118.8 in · 3,017 mm—
Ground clearance declared17.9 in · 455 mm17.3 in · 439 mm—
Fuel tank declared407.9 qt · 386.0 L379.4 qt · 359.0 L+8% 4760 (A)

John Deere 4760 (A) sources

Source
  • Source: Traktorenlexikon, “John Deere 4760”
  • Source: Traktorenlexikon, “John Deere 4560”

Steyr-Case 9200 a sources

Source
  • Source: Traktorenlexikon, “Steyr 9200 a”