John Deere 4560 (A) or WHITE 170?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 4560 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 170 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “similar machines”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for John Deere 4560 (A) and WHITE 170, with the call on each
Question4560 (A)170Call
Which puts more power through the PTO shaft?125.1 kW (167.8 hp)Traktorenlexikon, “John Deere 4560”123.6 kW (165.8 hp)Traktorenlexikon, “White 170”Not comparableNot comparable on power at the PTO shaft: the 4560 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 170 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 4560 (A) and the 170.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 4560 (A) and the 170.
Which pumps more oil for implements?No figureNo call on hydraulic flow: no figure on record for the 4560 (A) and the 170.
Which lifts more on the three-point hitch?2,640 kg (5,820 lb)Traktorenlexikon, “John Deere 4560”3,613 kg (7,965 lb)Traktorenlexikon, “White 170”Not comparableNot comparable on three-point lift: the 4560 (A): lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “John Deere 4560”); the 170: lift at the hitch ends, as stated by the source (Traktorenlexikon, “White 170”) — not the same quantity, basis and condition.
Which is heavier, for traction?7,185 kg (15,840 lb)Traktorenlexikon, “John Deere 4560”6,033 kg (13,300 lb)Traktorenlexikon, “White 170”Ahead (a fact, not an advantage)The John Deere 4560 (A) is 19% heavier (1,152 kg / 2,540 lb) than the WHITE 170 (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 4560 (A) and the 170.
Which has the wider choice of gears?15 to 16Traktorenlexikon, “John Deere 4560”18Traktorenlexikon, “White 170”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 4560 (A) and the 170.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “John Deere 4560”30 km/h (18.6 mph)Traktorenlexikon, “White 170”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?1000 rpmTraktorenlexikon, “John Deere 4560”1000 rpmTraktorenlexikon, “White 170”EvenEven on PTO speeds: the same speeds (1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “John Deere 4560”independentTraktorenlexikon, “White 170”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WD / 4WDTraktorenlexikon, “John Deere 4560”Two-wheel or four-wheel driveTraktorenlexikon, “White 170”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1992–19941990–1992EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The John Deere 4560 (A) is 19% heavier (1,152 kg / 2,540 lb) than the WHITE 170 (both unladen weight, as stated by the source).
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 4560 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 170 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the 4560 (A): lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “John Deere 4560”); the 170: lift at the hitch ends, as stated by the source (Traktorenlexikon, “White 170”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources