10 material differences · fewer than 12

Tractor oneJohn Deere 4560 (A)1992–1994No measured PTO figureTractor twoSteyr CVT 1702000–2003No measured PTO figure

Which should you choose?

We will not advise between these two machines, because the drive differs (Two-wheel or four-wheel drive; 4WD); they were not built in overlapping years (1992–1994; 2000–2003). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

10 material differences · 2 fields identical or within 5%, which is not counted as material

John Deere 4560 (A) and Steyr CVT 170, field by field
Field4560 (A)CVT 170Gap
Engine
Engine power, claimed claimed167.8 hp167.8 hp—
Engine declaredJohn Deere 6.076 TRW-07SISU WD 629.90differs
Displacement declared7.63 L6.60 L+16% 4560 (A)
Maximum torque declared—415 lb·ft · 562 N·m—
Transmission
Top speed declared18.6 mph · 30 km/h24.9–31.1 mph · 40–50 km/hdiffers
Clutch declaredPedal-operated hydraulic and oil-cooled multi-disc clutch——
Hydraulics & hitch
Hydraulic centre declaredClosed centre——
Pump flow declared—28.9 gpm · 109.5 L/min—
Pressure declared2,582 psi · 178 bar——
Rear PTO speeds declared1000 rpm540 rpm / 1000 rpmdiffers
Weight & dimensions
Unladen weight declared15,840 lb · 7,185 kg13,823 lb · 6,270 kg+15% 4560 (A)
Maximum permissible mass declared—24,251 lb · 11,000 kg—
Wheelbase declared118.5 in · 3,010 mm111.5 in · 2,832 mm+6% 4560 (A)
Length declared213.4 in · 5,420 mm190.9 in · 4,850 mm+12% 4560 (A)
Width declared118.0 in · 2,997 mm97.8–100.4 in · 2,485–2,550 mmdiffers
Height, over the cab declared118.9 in · 3,020 mm119.5 in · 3,035 mm—
Ground clearance declared16.5 in · 420 mm19.7 in · 500 mm+19% CVT 170
Turning radius, braked declared—19.2 ft · 5.84 m—
Fuel tank declared407.9 qt · 386.0 L327.6 qt · 310.0 L+25% 4560 (A)

John Deere 4560 (A) sources

Source
  • Source: Traktorenlexikon, “John Deere 4560”

Steyr CVT 170 sources

Source
  • Source: Traktorenlexikon, “Steyr CVT 170”