John Deere 4020 vs Steyr 1100 (a)

11 material differences · fewer than 12

Tractor one

1965–1972

No measured PTO figure

Tractor two

1971–1977

No measured PTO figure

Which should you choose?

Read our verdict on the 4020 and the 1100 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

John Deere 4020 and Steyr 1100 (a), field by field
Field	4020	1100 (a)	Gap
Engine
Engine power, claimed claimed	98.7 hp	96.7 hp	—
Engine declared	—	Steyr WD-610.40	—
Displacement declared	—	5.98 L	—
Maximum torque declared	260 lb·ft · 353 N·m	268 lb·ft · 363 N·m	—
Transmission
Top speed declared	12.4–18.6 mph · 20–30 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	Pedal operated dry single plate clutch	Dry Fichtel & Sachs single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	18.0 gpm · 68.0 L/min	9.4 gpm · 35.5 L/min	+92% 4020
Pressure declared	2,248 psi · 155 bar	—	—
Three-point lift at ends declared	5,952 lb · 2,700 kg	6,173 lb · 2,800 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,444 lb · 3,830 kg	7,363 lb · 3,340 kg	+15% 4020
Maximum permissible mass declared	13,228 lb · 6,000 kg	—	—
Wheelbase declared	89.0 in · 2,260 mm	99.8 in · 2,534 mm	+12% 1100 (a)
Length declared	150.2 in · 3,815 mm	165.0 in · 4,190 mm	+10% 1100 (a)
Width declared	89.6 in · 2,276 mm	82.5 in · 2,096 mm	+9% 4020
Height declared	78.5 in · 1,994 mm	85.0 in · 2,160 mm	+8% 1100 (a)
Ground clearance declared	23.2 in · 590 mm	19.5 in · 495 mm	+19% 4020
Turning radius, braked declared	10.8 ft · 3.30 m	13.1 ft · 4.00 m	+21% 1100 (a)
Fuel tank declared	135.3 qt · 128.0 L	124.7 qt · 118.0 L	+8% 4020

Source

Source