John Deere 4020 or SAME Tiger SIX 105?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 4020 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Tiger SIX 105 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The SAME Tiger SIX 105 suits heavy draft work (ploughing, cultivating) better on this data: four-wheel drive.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for John Deere 4020 and SAME Tiger SIX 105, with the call on each
Question4020Tiger SIX 105Call
Which puts more power through the PTO shaft?73.6 kW (98.7 hp)Traktorenlexikon, “John Deere 4020”73.5 kW (98.6 hp)Traktorenlexikon, “SAME Tiger Six 105”Not comparableNot comparable on power at the PTO shaft: the 4020 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Tiger SIX 105 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 4020 and the Tiger SIX 105.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 4020 and the Tiger SIX 105.
Which pumps more oil for implements?68.0 L/min (18.0 gpm)Traktorenlexikon, “John Deere 4020”30.0 L/min (7.9 gpm)Traktorenlexikon, “SAME Tiger Six 105”AheadThe John Deere 4020 has 127% more hydraulic flow (38.0 L/min / 10.0 gpm) than the SAME Tiger SIX 105 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,700 kg (5,952 lb)Traktorenlexikon, “John Deere 4020”4,240 kg (9,348 lb)Traktorenlexikon, “SAME Tiger Six 105”AheadThe SAME Tiger SIX 105 has 57% more lift (1,540 kg / 3,395 lb) than the John Deere 4020 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,830 kg (8,444 lb)Traktorenlexikon, “John Deere 4020”4,050 kg (8,929 lb)Traktorenlexikon, “SAME Tiger Six 105”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?6,000 kg (13,228 lb)Traktorenlexikon, “John Deere 4020”—No figureNo call on maximum permissible mass: no figure on record for the Tiger SIX 105.
Which has the wider choice of gears?8Traktorenlexikon, “John Deere 4020”12 to 24Traktorenlexikon, “SAME Tiger Six 105”AheadThe SAME Tiger SIX 105 has 50% more forward gears (4 gears) than the John Deere 4020 (both forward gears, as stated by the source).
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 4020 and the Tiger SIX 105.
Which is faster on the road?20 km/h (12.4 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “John Deere 4020”25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “SAME Tiger Six 105”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “John Deere 4020”540/1000 rpmTraktorenlexikon, “SAME Tiger Six 105”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “John Deere 4020”independentTraktorenlexikon, “SAME Tiger Six 105”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WDTraktorenlexikon, “John Deere 4020”Two-wheel or four-wheel driveTraktorenlexikon, “SAME Tiger Six 105”AheadThe SAME Tiger SIX 105 is available with four-wheel drive; the John Deere 4020 is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1965–19721977–1984Ahead (a fact, not an advantage)The SAME Tiger SIX 105 is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The John Deere 4020 has 127% more hydraulic flow (38.0 L/min / 10.0 gpm) than the SAME Tiger SIX 105 (both pump flow, as stated by the source).
  • The SAME Tiger SIX 105 has 57% more lift (1,540 kg / 3,395 lb) than the John Deere 4020 (both lift at the hitch ends, as stated by the source).
  • The SAME Tiger SIX 105 has 50% more forward gears (4 gears) than the John Deere 4020 (both forward gears, as stated by the source).
  • The SAME Tiger SIX 105 is available with four-wheel drive; the John Deere 4020 is two-wheel drive (as stated by the sources).
  • The SAME Tiger SIX 105 is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Not comparable on power at the PTO shaft: the 4020 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Tiger SIX 105 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources