John Deere 3350 (A) vs Landini 11800 (DT)

8 material differences · fewer than 12

Tractor one

1986–1993

No measured PTO figure

Tractor two

1987–2000

No measured PTO figure

Which should you choose?

Read our verdict on the 3350 (A) and the 11800 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 8 fields identical or within 5%, which is not counted as material

John Deere 3350 (A) and Landini 11800 (DT), field by field
Field	3350 (A)	11800 (DT)	Gap
Engine
Engine power, claimed claimed	98.7 hp	105.7 hp	+7% 11800 (DT)
Engine declared	John Deere 6.359 DL-009	PERKINS TW 6.354-4	differs
Displacement declared	5.88 L	5.80 L	—
Maximum torque declared	292 lb·ft · 396 N·m	258 lb·ft · 350 N·m	+13% 3350 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated dry LuK single-plate clutch as drive clutch	Pedal-operated dry single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	13.8 gpm · 52.3 L/min	13.5 gpm · 51.2 L/min	—
Pressure declared	3,336 psi · 230 bar	—	—
Three-point lift at ends declared	8,498 lb · 3,855 kg	9,914 lb · 4,497 kg	+17% 11800 (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,315 lb · 4,225 kg	9,678 lb · 4,390 kg	—
Maximum permissible mass declared	14,771 lb · 6,700 kg	15,432 lb · 7,000 kg	—
Wheelbase declared	100.4 in · 2,551 mm	106.1 in · 2,696 mm	+6% 11800 (DT)
Length declared	175.8 in · 4,465 mm	175.2 in · 4,450 mm	—
Width declared	88.5 in · 2,249 mm	83.9 in · 2,130 mm	+6% 3350 (A)
Height declared	111.4 in · 2,830 mm	110.6 in · 2,810 mm	—
Ground clearance declared	25.6 in · 650 mm	18.0 in · 457 mm	+42% 3350 (A)
Fuel tank declared	127.9–182.8 qt · 121.0–173.0 L	200.8 qt · 190.0 L	differs

Source

Source