John Deere 3120 (A) or SOMECA 880 (TD)?

Which should you choose?

The figures split: the John Deere 3120 (A) is ahead on hydraulic flow and three-point lift; the SOMECA 880 (TD) is ahead on maximum permissible mass.

  • The John Deere 3120 (A) suits loader and hydraulic implement work better on this data: 74% (19.9 L/min / 5.3 gpm) more hydraulic flow and 19% (390 kg / 860 lb) more three-point lift.
  • The SOMECA 880 (TD) suits road haulage better on this data: 30% (1,350 kg / 2,976 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for John Deere 3120 (A) and SOMECA 880 (TD), with the call on each
Question3120 (A)880 (TD)Call
Which puts more power through the PTO shaft?55.2 kW (74.0 hp)Traktorenlexikon, “John Deere 3120”53.9 kW (72.3 hp)Traktorenlexikon, “Someca 880”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 3120 (A) and the 880 (TD).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 3120 (A) and the 880 (TD).
Which pumps more oil for implements?46.9 L/min (12.4 gpm)Traktorenlexikon, “John Deere 3120”27.0 L/min (7.1 gpm)Traktorenlexikon, “Someca 880”AheadThe John Deere 3120 (A) has 74% more hydraulic flow (19.9 L/min / 5.3 gpm) than the SOMECA 880 (TD) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,480 kg (5,467 lb)Traktorenlexikon, “John Deere 3120”2,090 kg (4,608 lb)Traktorenlexikon, “Someca 880”AheadThe John Deere 3120 (A) has 19% more lift (390 kg / 860 lb) than the SOMECA 880 (TD) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,807 kg (8,393 lb)Traktorenlexikon, “John Deere 3120”2,945 kg (6,493 lb)Traktorenlexikon, “Someca 880”Ahead (a fact, not an advantage)The John Deere 3120 (A) is 29% heavier (862 kg / 1,900 lb) than the SOMECA 880 (TD) (both unladen weight, as stated by the source).
Which may carry more ballast and load?4,500 kg (9,921 lb)Traktorenlexikon, “John Deere 3120”5,850 kg (12,897 lb)Traktorenlexikon, “Someca 880”AheadThe SOMECA 880 (TD) has 30% higher maximum permissible mass (1,350 kg / 2,976 lb) than the John Deere 3120 (A) (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?12Traktorenlexikon, “John Deere 3120”8 to 16Traktorenlexikon, “Someca 880”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 3120 (A) and the 880 (TD).
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “John Deere 3120”25 km/h (15.5 mph)Traktorenlexikon, “Someca 880”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “John Deere 3120”540/1000 rpmTraktorenlexikon, “Someca 880”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “John Deere 3120”independentTraktorenlexikon, “Someca 880”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “John Deere 3120”Two-wheel or four-wheel driveTraktorenlexikon, “Someca 880”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1969–19721975–1980Ahead (a fact, not an advantage)The SOMECA 880 (TD) is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The John Deere 3120 (A) has 74% more hydraulic flow (19.9 L/min / 5.3 gpm) than the SOMECA 880 (TD) (both pump flow, as stated by the source).
  • The John Deere 3120 (A) has 19% more lift (390 kg / 860 lb) than the SOMECA 880 (TD) (both lift at the hitch ends, as stated by the source).
  • The John Deere 3120 (A) is 29% heavier (862 kg / 1,900 lb) than the SOMECA 880 (TD) (both unladen weight, as stated by the source).
  • The SOMECA 880 (TD) has 30% higher maximum permissible mass (1,350 kg / 2,976 lb) than the John Deere 3120 (A) (both maximum permissible mass, as stated by the source).
  • The SOMECA 880 (TD) is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.

← Every figure for both machines, side by side, with sources