8 material differences · fewer than 12

Tractor oneJohn Deere 30551992–1993No measured PTO figureTractor twoSteyr 1108 (a)1977–1979No measured PTO figure

Which should you choose?

Read our verdict on the 3055 and the 1108 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 8 fields identical or within 5%, which is not counted as material

John Deere 3055 and Steyr 1108 (a), field by field
Field	3055	1108 (a)	Gap
Engine
Engine power, claimed claimed	103.7 hp	103.7 hp	—
Engine declared	John Deere 6.359 DL-011	Steyr WD-610.44	differs
Displacement declared	5.88 L	5.98 L	—
Maximum torque declared	285 lb·ft · 387 N·m	268 lb·ft · 363 N·m	+7% 3055
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal-operated, dry LuK single-disc clutch	Dry Fichtel & Sachs single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	24.2 gpm · 91.5 L/min	9.4 gpm · 35.5 L/min	+158% 3055
Pressure declared	3,336 psi · 230 bar	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,524 lb · 4,320 kg	8,477 lb · 3,845 kg	+12% 3055
Wheelbase declared	100.4 in · 2,551 mm	99.8 in · 2,534 mm	—
Length declared	166.9 in · 4,240 mm	165.0 in · 4,190 mm	—
Width declared	89.0 in · 2,260 mm	82.5 in · 2,096 mm	+8% 3055
Height, over the exhaust declared	107.7 in · 2,735 mm	85.0 in · 2,160 mm	+27% 3055
Ground clearance declared	17.3 in · 440 mm	19.5 in · 495 mm	+13% 1108 (a)
Turning radius, braked declared	13.2 ft · 4.01 m	13.1 ft · 4.00 m	—
Fuel tank declared	127.9 qt · 121.0 L	124.7 qt · 118.0 L	—

Source

Source