7 material differences · fewer than 12
Tractor oneJohn Deere 30551992–1993No measured PTO figureTractor twoMassey Ferguson MF 6265 (A)1999–2003No measured PTO figure
Which should you choose?
Read our verdict on the 3055 and the MF 6265 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | 3055 | MF 6265 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 103.7 hp | 103.7 hp | — |
| Engine declared | John Deere 6.359 DL-011 | Perkins 1004.40 TWG | differs |
| Displacement declared | 5.88 L | 3.99 L | +47% 3055 |
| Maximum torque declared | 285 lb·ft · 387 N·m | 291 lb·ft · 394 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 24.9 mph · 40 km/h | +33% MF 6265 (A) |
| Clutch declared | Pedal-operated, dry LuK single-disc clutch | Pedal-operated hydraulic Valeo multi-plate clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Pump flow declared | 24.2 gpm · 91.5 L/min | 25.3 gpm · 95.7 L/min | — |
| Pressure declared | 3,336 psi · 230 bar | 3,336 psi · 230 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000/540E/1000E rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 9,524 lb · 4,320 kg | 9,987 lb · 4,530 kg | — |
| Maximum permissible mass declared | — | 19,401 lb · 8,800 kg | — |
| Wheelbase declared | 100.4 in · 2,551 mm | 101.3 in · 2,574 mm | — |
| Length declared | 166.9 in · 4,240 mm | 171.3 in · 4,350 mm | — |
| Width declared | 89.0 in · 2,260 mm | 80.0–98.4 in · 2,033–2,500 mm | differs |
| Ground clearance declared | 17.3 in · 440 mm | 16.9 in · 430 mm | — |
| Turning radius, braked declared | 13.2 ft · 4.01 m | — | — |
| Fuel tank declared | 127.9 qt · 121.0 L | 237.8 qt · 225.0 L | +86% MF 6265 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
John Deere 3055 sources
- Source: Traktorenlexikon, “John Deere 3055”
Massey Ferguson MF 6265 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 6265”
- Source: Traktorenlexikon, “Massey Ferguson MF 4355”