John Deere 2950 (A) vs Renault 113-12 TX

9 material differences · fewer than 12

Tractor one

1983–1988

No measured PTO figure

Tractor two

1981–1986

No measured PTO figure

Which should you choose?

Read our verdict on the 2950 (A) and the 113-12 TX → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 2 fields identical or within 5%, which is not counted as material

John Deere 2950 (A) and Renault 113-12 TX, field by field
Field	2950 (A)	113-12 TX	Gap
Engine
Engine power, claimed claimed	83.9 hp	101.6 hp	+21% 113-12 TX
Engine declared	—	MWM D 227-6	—
Displacement declared	—	5.66 L	—
Maximum torque declared	—	235 lb·ft · 319 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	Pedal-operated, dry single-disc clutch as driving clutch	Dry LuK double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	23.0 gpm · 87.1 L/min	11.0 gpm · 41.8 L/min	+108% 2950 (A)
Pressure declared	—	1,595 psi · 110 bar	—
Three-point lift at ends declared	—	9,921 lb · 4,500 kg	—
Rear PTO speeds declared	—	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,098 lb · 4,127 kg	10,406 lb · 4,720 kg	+14% 113-12 TX
Maximum permissible mass declared	13,184 lb · 5,980 kg	—	—
Wheelbase declared	100.4 in · 2,550 mm	109.4 in · 2,779 mm	+9% 113-12 TX
Length declared	153.1 in · 3,890 mm	185.9 in · 4,723 mm	+21% 113-12 TX
Width declared	79.9 in · 2,029 mm	80.9 in · 2,055 mm	—
Height declared	108.3 in · 2,750 mm	112.6 in · 2,859 mm	—
Ground clearance declared	25.6 in · 650 mm	16.6 in · 422 mm	+54% 2950 (A)
Turning radius, braked declared	12.5 ft · 3.80 m	13.7 ft · 4.17 m	+10% 113-12 TX
Fuel tank declared	129.2 qt · 122.3 L	211.3 qt · 200.0 L	+64% 113-12 TX

Source

Source