John Deere 2950 (A) vs Massey Ferguson MF 3080 (A)

11 material differences · fewer than 12

Tractor one

1983–1988

No measured PTO figure

Tractor two

1989–1997

No measured PTO figure

Which should you choose?

Read our verdict on the 2950 (A) and the MF 3080 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 1 fields identical or within 5%, which is not counted as material

John Deere 2950 (A) and Massey Ferguson MF 3080 (A), field by field
Field	2950 (A)	MF 3080 (A)	Gap
Engine
Engine power, claimed claimed	83.9 hp	95.7 hp	+14% MF 3080 (A)
Engine declared	—	Perkins A 6.354-4 TW	—
Displacement declared	—	5.80 L	—
Maximum torque declared	—	266 lb·ft · 361 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated, dry single-disc clutch as driving clutch	pedal-operated dry air-cooled VALEO single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	Open centre	differs
Pump flow declared	23.0 gpm · 87.1 L/min	13.5 gpm · 51.2 L/min	+70% 2950 (A)
Pressure declared	—	2,277–2,350 psi · 157–162 bar	—
Three-point lift at ends declared	—	8,397 lb · 3,809 kg	—
Rear PTO speeds declared	—	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,098 lb · 4,127 kg	11,398 lb · 5,170 kg	+25% MF 3080 (A)
Maximum permissible mass declared	13,184 lb · 5,980 kg	15,432 lb · 7,000 kg	+17% MF 3080 (A)
Wheelbase declared	100.4 in · 2,550 mm	106.1 in · 2,696 mm	+6% MF 3080 (A)
Length declared	153.1 in · 3,890 mm	170.2 in · 4,323 mm	+11% MF 3080 (A)
Width declared	79.9 in · 2,029 mm	73.3 in · 1,861 mm	+9% 2950 (A)
Height declared	108.3 in · 2,750 mm	108.2 in · 2,749 mm	—
Ground clearance declared	25.6 in · 650 mm	17.0 in · 432 mm	+50% 2950 (A)
Turning radius, braked declared	12.5 ft · 3.80 m	—	—
Fuel tank declared	129.2 qt · 122.3 L	200.8 qt · 190.0 L	+55% MF 3080 (A)

Source

Source