John Deere 2800 (A) or ZETOR 9641?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 2800 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 9641 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The ZETOR 9641 suits loader and hydraulic implement work better on this data: 35% (15.1 L/min / 4.0 gpm) more hydraulic flow and 45% (1,740 kg / 3,836 lb) more three-point lift.
- The John Deere 2800 (A) suits road haulage better on this data: 12% (800 kg / 1,764 lb) more maximum permissible mass.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 2800 (A) | 9641 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 69.9 kW (93.7 hp)Traktorenlexikon, “John Deere 2800” | 69.9 kW (93.7 hp)Traktorenlexikon, “Zetor 9641 (1999-2002)” | Not comparableNot comparable on power at the PTO shaft: the 2800 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 9641 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 2800 (A) and the 9641. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 2800 (A) and the 9641. |
| Which pumps more oil for implements? | 42.9 L/min (11.3 gpm)Traktorenlexikon, “John Deere 2800” | 58.0 L/min (15.3 gpm)Traktorenlexikon, “Zetor 9641 (1999-2002)” | AheadThe ZETOR 9641 has 35% more hydraulic flow (15.1 L/min / 4.0 gpm) than the John Deere 2800 (A) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 3,900 kg (8,598 lb)Traktorenlexikon, “John Deere 2800” | 5,640 kg (12,434 lb)Traktorenlexikon, “Zetor 9641 (1999-2002)” | AheadThe ZETOR 9641 has 45% more lift (1,740 kg / 3,836 lb) than the John Deere 2800 (A) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 3,700 kg (8,157 lb)Traktorenlexikon, “John Deere 2800” | 4,430 kg (9,766 lb)Traktorenlexikon, “Zetor 9641 (1999-2002)” | Ahead (a fact, not an advantage)The ZETOR 9641 is 20% heavier (730 kg / 1,609 lb) than the John Deere 2800 (A) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 7,500 kg (16,535 lb)Traktorenlexikon, “John Deere 2800” | 6,700 kg (14,771 lb)Traktorenlexikon, “Zetor 9641 (1999-2002)” | AheadThe John Deere 2800 (A) has 12% higher maximum permissible mass (800 kg / 1,764 lb) than the ZETOR 9641 (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | 16 to 18Traktorenlexikon, “John Deere 2800” | 24Traktorenlexikon, “Zetor 9641 (1999-2002)” | AheadThe ZETOR 9641 has 33% more forward gears (6 gears) than the John Deere 2800 (A) (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 2800 (A) and the 9641. |
| Which is faster on the road? | 30 km/h (18.6 mph) to 35 km/h (21.7 mph)Traktorenlexikon, “John Deere 2800” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Zetor 9641 (1999-2002)” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “John Deere 2800” | 540/1000 rpmTraktorenlexikon, “Zetor 9641 (1999-2002)” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Zetor 9641 (1999-2002)” | No figureNo call on PTO independence: not stated for the 2800 (A). |
| Which drives on both axles? | 2WD / 4WDTraktorenlexikon, “John Deere 2800” | Two-wheel or four-wheel driveTraktorenlexikon, “Zetor 9641 (1999-2002)” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1993–1996 | 1999–2002 | Ahead (a fact, not an advantage)The ZETOR 9641 is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The ZETOR 9641 has 35% more hydraulic flow (15.1 L/min / 4.0 gpm) than the John Deere 2800 (A) (both pump flow, as stated by the source).
- The ZETOR 9641 has 45% more lift (1,740 kg / 3,836 lb) than the John Deere 2800 (A) (both lift at the hitch ends, as stated by the source).
- The ZETOR 9641 is 20% heavier (730 kg / 1,609 lb) than the John Deere 2800 (A) (both unladen weight, as stated by the source).
- The John Deere 2800 (A) has 12% higher maximum permissible mass (800 kg / 1,764 lb) than the ZETOR 9641 (both maximum permissible mass, as stated by the source).
- The ZETOR 9641 has 33% more forward gears (6 gears) than the John Deere 2800 (A) (both forward gears, as stated by the source).
- The ZETOR 9641 is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the 2800 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 9641 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources