John Deere 2800 (A) or Massey Ferguson MF 2625?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 2800 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 2625 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Massey Ferguson MF 2625 suits loader and hydraulic implement work better on this data: 41% (1,580 kg / 3,483 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 2800 (A) | MF 2625 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 69.9 kW (93.7 hp)Traktorenlexikon, “John Deere 2800” | 69.9 kW (93.7 hp)Traktorenlexikon, “Massey Ferguson MF 2625” | Not comparableNot comparable on power at the PTO shaft: the 2800 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 2625 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 2800 (A) and the MF 2625. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 2800 (A) and the MF 2625. |
| Which pumps more oil for implements? | 42.9 L/min (11.3 gpm)Traktorenlexikon, “John Deere 2800” | — | No figureNo call on hydraulic flow: no figure on record for the MF 2625. |
| Which lifts more on the three-point hitch? | 3,900 kg (8,598 lb)Traktorenlexikon, “John Deere 2800” | 5,480 kg (12,081 lb)Traktorenlexikon, “Massey Ferguson MF 2625” | AheadThe Massey Ferguson MF 2625 has 41% more lift (1,580 kg / 3,483 lb) than the John Deere 2800 (A) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 3,700 kg (8,157 lb)Traktorenlexikon, “John Deere 2800” | 5,450 kg (12,015 lb)Traktorenlexikon, “Massey Ferguson MF 2625” | Ahead (a fact, not an advantage)The Massey Ferguson MF 2625 is 47% heavier (1,750 kg / 3,858 lb) than the John Deere 2800 (A) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 7,500 kg (16,535 lb)Traktorenlexikon, “John Deere 2800” | 7,500 kg (16,535 lb)Traktorenlexikon, “Massey Ferguson MF 2625” | EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which has the wider choice of gears? | 16 to 18Traktorenlexikon, “John Deere 2800” | 16Traktorenlexikon, “Massey Ferguson MF 2625” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 2800 (A) and the MF 2625. |
| Which is faster on the road? | 30 km/h (18.6 mph) to 35 km/h (21.7 mph)Traktorenlexikon, “John Deere 2800” | 30 km/h (18.6 mph)Traktorenlexikon, “Massey Ferguson MF 2625” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “John Deere 2800” | 540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 2625” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Massey Ferguson MF 2625” | No figureNo call on PTO independence: not stated for the 2800 (A). |
| Which drives on both axles? | 2WD / 4WDTraktorenlexikon, “John Deere 2800” | Two-wheel or four-wheel driveTraktorenlexikon, “Massey Ferguson MF 2625” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1993–1996 | 1985–1986 | Ahead (a fact, not an advantage)The John Deere 2800 (A) is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Massey Ferguson MF 2625 has 41% more lift (1,580 kg / 3,483 lb) than the John Deere 2800 (A) (both lift at the hitch ends, as stated by the source).
- The Massey Ferguson MF 2625 is 47% heavier (1,750 kg / 3,858 lb) than the John Deere 2800 (A) (both unladen weight, as stated by the source).
- The John Deere 2800 (A) is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.
- Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the 2800 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 2625 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources