John Deere 2700 (A) vs New Holland T 5040

11 material differences · fewer than 12

Tractor one

1993–1996

No measured PTO figure

Tractor two

2008–2012

No measured PTO figure

Which should you choose?

Read our verdict on the 2700 (A) and the T 5040 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 6 fields identical or within 5%, which is not counted as material

John Deere 2700 (A) and New Holland T 5040, field by field
Field	2700 (A)	T 5040	Gap
Engine
Engine power, claimed claimed	83.9 hp	84.9 hp	—
Engine declared	ZETOR 1201	IVECO-NEF F4CE 9484 N	differs
Displacement declared	4.16 L	4.49 L	+8% T 5040
Maximum torque declared	219 lb·ft · 297 N·m	254 lb·ft · 345 N·m	+16% T 5040
Transmission
Top speed declared	18.6–21.7 mph · 30–35 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry ZETOR single-disc clutch	Electrohydraulically actuated wet multi-disc clutch	differs
Hydraulics & hitch
Pump flow declared	12.3 gpm · 46.7 L/min	17.4 gpm · 66.0 L/min	+41% T 5040
Pressure declared	2,350 psi · 162 bar	3,336 psi · 230 bar	+42% T 5040
Three-point lift at ends declared	9,744 lb · 4,420 kg	10,582 lb · 4,800 kg	+9% T 5040
Rear PTO speeds declared	540/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,344 lb · 3,785 kg	8,389 lb · 3,805 kg	—
Maximum permissible mass declared	16,535 lb · 7,500 kg	13,669 lb · 6,200 kg	+21% 2700 (A)
Wheelbase declared	93.5 in · 2,375 mm	92.2 in · 2,342 mm	—
Length declared	165.0 in · 4,190 mm	158.7 in · 4,030 mm	—
Width declared	76.8 in · 1,950 mm	78.9 in · 2,005 mm	—
Height declared	103.9 in · 2,640 mm	100.2 in · 2,546 mm	—
Ground clearance declared	12.8 in · 325 mm	—	—
Fuel tank declared	111.0 qt · 105.0 L	134.2 qt · 127.0 L	+21% T 5040

Source

Source