9 material differences · fewer than 12
Tractor oneJohn Deere 2555 (A)1984–1992No measured PTO figureTractor twoZETOR 7321/7341 Super1997–2004No measured PTO figure
Which should you choose?
Read our verdict on the 2555 (A) and the 7321/7341 Super → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 2555 (A) | 7321/7341 Super | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 76.0 hp | 75.9 hp | — |
| Engine declared | John Deere 4.239 DL-008 or TL-006 | ZETOR Z-7302 | differs |
| Displacement declared | 3.92 L | 3.92 L | — |
| Maximum torque declared | — | 221 lb·ft · 300 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Pedal-operated dry LuK single-disc clutch | Pedal operated driving clutch with 310 mm disc diameter | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Hydraulic control declared | — | Constant flow | — |
| Pump flow declared | — | 14.2 gpm · 53.8 L/min | — |
| Pressure declared | 3,336 psi · 230 bar | 1,740 psi · 120 bar | +92% 2555 (A) |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,110 lb · 3,225 kg | 7,264 lb · 3,295 kg | — |
| Maximum permissible mass declared | — | 11,905 lb · 5,400 kg | — |
| Wheelbase declared | 89.7 in · 2,279 mm | 88.9 in · 2,257 mm | — |
| Length declared | 145.0 in · 3,683 mm | 132.7 in · 3,370 mm | +9% 2555 (A) |
| Width declared | 89.4 in · 2,270 mm | 75.8–88.6 in · 1,925–2,250 mm | differs |
| Ground clearance declared | 16.1 in · 410 mm | 17.5 in · 444 mm | +8% 7321/7341 Super |
| Turning radius, braked declared | — | 11.0 ft · 3.35 m | — |
| Fuel tank declared | 88.8 qt · 84.0 L | 126.8 qt · 120.0 L | +43% 7321/7341 Super |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
John Deere 2555 (A) sources
- Source: Traktorenlexikon, “John Deere 2555”
ZETOR 7321/7341 Super sources
- Source: Traktorenlexikon, “Zetor 7321/7341”