John Deere 2555 (A) vs Renault 80-12 TX

11 material differences · fewer than 12

Tractor one

1984–1992

No measured PTO figure

Tractor two

1985–1987

No measured PTO figure

Which should you choose?

Read our verdict on the 2555 (A) and the 80-12 TX → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

John Deere 2555 (A) and Renault 80-12 TX, field by field
Field	2555 (A)	80-12 TX	Gap
Engine
Engine power, claimed claimed	76.0 hp	77.0 hp	—
Engine declared	John Deere 4.239 DL-008 or TL-006	MWM D 226-4	differs
Displacement declared	3.92 L	4.15 L	+6% 80-12 TX
Maximum torque declared	—	190 lb·ft · 258 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal-operated dry LuK single-disc clutch	Dry LuK double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	—	10.9 gpm · 41.4 L/min	—
Pressure declared	3,336 psi · 230 bar	1,595 psi · 110 bar	+109% 2555 (A)
Three-point lift at ends declared	3,371 lb · 1,529 kg	8,422 lb · 3,820 kg	+150% 80-12 TX
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,110 lb · 3,225 kg	6,834 lb · 3,100 kg	—
Wheelbase declared	89.7 in · 2,279 mm	95.6 in · 2,428 mm	+7% 80-12 TX
Length declared	145.0 in · 3,683 mm	154.9 in · 3,934 mm	+7% 80-12 TX
Width declared	89.4 in · 2,270 mm	78.0 in · 1,980 mm	+15% 2555 (A)
Height declared	103.1 in · 2,620 mm	109.3 in · 2,775 mm	+6% 80-12 TX
Ground clearance declared	16.1 in · 410 mm	—	—
Turning radius, braked declared	—	12.8 ft · 3.90 m	—
Fuel tank declared	88.8 qt · 84.0 L	77.1 qt · 73.0 L	+15% 2555 (A)

Source

Source