9 material differences · fewer than 12
Tractor oneJohn Deere 2555 (A)1984–1992No measured PTO figureTractor twoLandini 8800 (DT)1987–2000No measured PTO figure
Which should you choose?
Read our verdict on the 2555 (A) and the 8800 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 2555 (A) | 8800 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 76.0 hp | 75.9 hp | — |
| Engine declared | John Deere 4.239 DL-008 or TL-006 | PERKINS LF 4.248 | differs |
| Displacement declared | 3.92 L | 4.07 L | — |
| Maximum torque declared | — | 185 lb·ft · 251 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal-operated dry LuK single-disc clutch | Pedal-operated dry single-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Pump flow declared | — | 13.6 gpm · 51.5 L/min | — |
| Pressure declared | 3,336 psi · 230 bar | — | — |
| Three-point lift, at the coupling points declared | 3,371 lb · 1,529 kg | 7,397 lb · 3,355 kg | +119% 8800 (DT) |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,110 lb · 3,225 kg | 8,422 lb · 3,820 kg | +18% 8800 (DT) |
| Wheelbase declared | 89.7 in · 2,279 mm | 93.3 in · 2,371 mm | — |
| Length declared | 145.0 in · 3,683 mm | 155.9 in · 3,959 mm | +7% 8800 (DT) |
| Width declared | 89.4 in · 2,270 mm | 78.3 in · 1,990 mm | +14% 2555 (A) |
| Ground clearance declared | 16.1 in · 410 mm | 14.1 in · 357 mm | +15% 2555 (A) |
| Fuel tank declared | 88.8 qt · 84.0 L | 156.4 qt · 148.0 L | +76% 8800 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
John Deere 2555 (A) sources
- Source: Traktorenlexikon, “John Deere 2555”
Landini 8800 (DT) sources
- Source: Traktorenlexikon, “Landini 8800 DT”