10 material differences · fewer than 12
Tractor oneJohn Deere 2200 (A)1993–1996No measured PTO figureTractor twoSteyr M 963 (a)2001–2004No measured PTO figure
Which should you choose?
Read our verdict on the 2200 (A) and the M 963 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 2200 (A) | M 963 (a) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 62.2 hp | 62.2 hp | — |
| Engine declared | ZETOR 7201 | PERKINS 903-27 T | differs |
| Displacement declared | 3.60 L | 2.70 L | +33% 2200 (A) |
| Maximum torque declared | 166 lb·ft · 225 N·m | 176 lb·ft · 239 N·m | +6% M 963 (a) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Dry Zetor double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 10.8 gpm · 41.0 L/min | 8.1 gpm · 30.8 L/min | +33% 2200 (A) |
| Pressure declared | 1,160 psi · 80 bar | 3,481 psi · 240 bar | +200% M 963 (a) |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,978 lb · 3,165 kg | 5,490 lb · 2,490 kg | +27% 2200 (A) |
| Maximum permissible mass declared | 12,125 lb · 5,500 kg | — | — |
| Wheelbase declared | 88.8 in · 2,256 mm | 83.3 in · 2,117 mm | +7% 2200 (A) |
| Length declared | 148.6 in · 3,775 mm | 139.0 in · 3,530 mm | +7% 2200 (A) |
| Width declared | 73.8–88.6 in · 1,875–2,250 mm | 74.8 in · 1,900 mm | differs |
| Ground clearance declared | 16.1 in · 410 mm | — | — |
| Fuel tank declared | 74.0 qt · 70.0 L | 77.1 qt · 73.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
John Deere 2200 (A) sources
- Source: Traktorenlexikon, “John Deere 2200”
Steyr M 963 (a) sources
- Source: Traktorenlexikon, “Steyr M 963”
- Source: Traktorenlexikon, “Case-IH CS52/a”