John Deere 2200 (A) vs Steyr 964 (a)

13 material differences

Tractor one

1993–1996

No measured PTO figure

Tractor two

1992–1997

No measured PTO figure

Which should you choose?

Read our verdict on the 2200 (A) and the 964 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 5 fields identical or within 5%, which is not counted as material

John Deere 2200 (A) and Steyr 964 (a), field by field
Field	2200 (A)	964 (a)	Gap
Engine
Engine power, claimed claimed	62.2 hp	63.2 hp	—
Engine declared	ZETOR 7201	Steyr WD 301.82 or WD 301.83	differs
Displacement declared	3.60 L	3.12 L	+15% 2200 (A)
Maximum torque declared	166 lb·ft · 225 N·m	186 lb·ft · 252 N·m	+12% 964 (a)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Dry Zetor double clutch	Dry Fichtel & Sachs double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	10.8 gpm · 41.0 L/min	11.2 gpm · 42.3 L/min	—
Pressure declared	1,160 psi · 80 bar	3,481 psi · 240 bar	+200% 964 (a)
Three-point lift at ends declared	8,135 lb · 3,690 kg	6,437 lb · 2,920 kg	+26% 2200 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,978 lb · 3,165 kg	6,261 lb · 2,840 kg	+11% 2200 (A)
Maximum permissible mass declared	12,125 lb · 5,500 kg	9,921 lb · 4,500 kg	+22% 2200 (A)
Wheelbase declared	88.8 in · 2,256 mm	87.0 in · 2,209 mm	—
Length declared	148.6 in · 3,775 mm	146.1 in · 3,710 mm	—
Width declared	73.8 in · 1,875 mm	81.5 in · 2,070 mm	+10% 964 (a)
Height declared	104.9 in · 2,665 mm	95.5 in · 2,425 mm	+10% 2200 (A)
Ground clearance declared	16.1 in · 410 mm	17.5 in · 445 mm	+9% 964 (a)
Turning radius, braked declared	—	11.9 ft · 3.64 m	—
Fuel tank declared	74.0 qt · 70.0 L	66.6 qt · 63.0 L	+11% 2200 (A)

Source

Source