John Deere 2200 (A) vs SAME Dorado 65 (DT)

12 material differences

Tractor one

1993–1996

No measured PTO figure

Tractor two

2000–2004

No measured PTO figure

Which should you choose?

Read our verdict on the 2200 (A) and the Dorado 65 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

John Deere 2200 (A) and SAME Dorado 65 (DT), field by field
Field	2200 (A)	Dorado 65 (DT)	Gap
Engine
Engine power, claimed claimed	62.2 hp	62.1 hp	—
Engine declared	ZETOR 7201	SAME-DEUTZ-FAHR 1000.3 AT 5	differs
Displacement declared	3.60 L	3.00 L	+20% 2200 (A)
Maximum torque declared	166 lb·ft · 225 N·m	166 lb·ft · 225 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	24.9 mph · 40 km/h	+33% Dorado 65 (DT)
Clutch declared	Dry Zetor double clutch	Pedal-operated, dry S.D.F. single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	10.8 gpm · 41.0 L/min	—	—
Pressure declared	1,160 psi · 80 bar	—	—
Three-point lift at ends declared	8,135 lb · 3,690 kg	6,393 lb · 2,900 kg	+27% 2200 (A)
Rear PTO speeds declared	540/1000 rpm	540/540E rpm	differs
Weight & dimensions
Unladen weight declared	6,978 lb · 3,165 kg	5,732 lb · 2,600 kg	+22% 2200 (A)
Maximum permissible mass declared	12,125 lb · 5,500 kg	11,023 lb · 5,000 kg	+10% 2200 (A)
Wheelbase declared	88.8 in · 2,256 mm	82.9 in · 2,105 mm	+7% 2200 (A)
Length declared	148.6 in · 3,775 mm	146.5 in · 3,720 mm	—
Width declared	73.8 in · 1,875 mm	75.6 in · 1,920 mm	—
Height declared	104.9 in · 2,665 mm	94.5 in · 2,400 mm	+11% 2200 (A)
Ground clearance declared	16.1 in · 410 mm	17.5 in · 445 mm	+9% Dorado 65 (DT)
Turning radius, braked declared	—	10.0 ft · 3.06 m	—
Fuel tank declared	74.0 qt · 70.0 L	95.1 qt · 90.0 L	+29% Dorado 65 (DT)

Source

Source