John Deere 2140 (A) vs ZETOR 8111/8145

7 material differences · fewer than 12

Tractor one

1979–1986

No measured PTO figure

Tractor two

1984–1990

No measured PTO figure

Which should you choose?

Read our verdict on the 2140 (A) and the 8111/8145 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 5 fields identical or within 5%, which is not counted as material

John Deere 2140 (A) and ZETOR 8111/8145, field by field
Field	2140 (A)	8111/8145	Gap
Engine
Engine power, claimed claimed	81.0 hp	80.9 hp	—
Engine declared	—	ZETOR Z-8002.1 or Z-8401.1	—
Displacement declared	—	4.56 L	—
Maximum torque declared	199 lb·ft · 270 N·m	190 lb·ft · 257 N·m	—
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	pedal-operated dry ZTS single-disc clutch	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	12.4 gpm · 47.0 L/min	12.8 gpm · 48.6 L/min	—
Pressure declared	2,466 psi · 170 bar	—	—
Three-point lift at ends declared	8,003 lb · 3,630 kg	—	—
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,724 lb · 3,050 kg	9,127 lb · 4,140 kg	+36% 8111/8145
Maximum permissible mass declared	11,905 lb · 5,400 kg	—	—
Wheelbase declared	89.8 in · 2,280 mm	93.9 in · 2,385 mm	—
Length declared	147.0 in · 3,735 mm	163.0 in · 4,140 mm	+11% 8111/8145
Width declared	80.9 in · 2,055 mm	76.4 in · 1,940 mm	+6% 2140 (A)
Height declared	104.1 in · 2,645 mm	104.5 in · 2,655 mm	—
Ground clearance declared	25.8 in · 656 mm	11.8 in · 300 mm	+119% 2140 (A)
Turning radius, braked declared	—	12.3 ft · 3.75 m	—
Fuel tank declared	107.8 qt · 102.0 L	132.1 qt · 125.0 L	+23% 8111/8145

Source

Source