7 material differences · fewer than 12
Tractor oneJohn Deere 2140 (A)1979–1986No measured PTO figureTractor twoSAME Leopard 85 Export (DT)1978–1982No measured PTO figure
Which should you choose?
Read our verdict on the 2140 (A) and the Leopard 85 Export (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 2140 (A) | Leopard 85 Export (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 81.0 hp | 80.9 hp | — |
| Engine declared | — | SAME DA 1054 P | — |
| Displacement declared | — | 4.15 L | — |
| Maximum torque declared | 199 lb·ft · 270 N·m | 197 lb·ft · 267 N·m | — |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | — | Pedal-operated dry SAME single-disc clutch with 320 mm disc diameter | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Pump flow declared | 12.4 gpm · 47.0 L/min | — | — |
| Pressure declared | 2,466 psi · 170 bar | 2,973 psi · 205 bar | +21% Leopard 85 Export (DT) |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,724 lb · 3,050 kg | 7,606 lb · 3,450 kg | +13% Leopard 85 Export (DT) |
| Maximum permissible mass declared | 11,905 lb · 5,400 kg | — | — |
| Wheelbase declared | 89.8 in · 2,280 mm | 93.1 in · 2,365 mm | — |
| Length declared | 147.0 in · 3,735 mm | 153.9 in · 3,910 mm | — |
| Width declared | 80.9 in · 2,055 mm | 77.2–100.8 in · 1,960–2,560 mm | differs |
| Ground clearance declared | 25.8 in · 656 mm | 19.7 in · 500 mm | +31% 2140 (A) |
| Turning radius, braked declared | — | 11.8 ft · 3.60 m | — |
| Fuel tank declared | 107.8 qt · 102.0 L | 126.8 qt · 120.0 L | +18% Leopard 85 Export (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
John Deere 2140 (A) sources
- Source: Traktorenlexikon, “John Deere 2140”
SAME Leopard 85 Export (DT) sources
- Source: Traktorenlexikon, “SAME Leopard 85”