John Deere 2130 or John Deere 3020?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 2130 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 3020 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The John Deere 3020 suits road haulage better on this data: 12% (520 kg / 1,146 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for John Deere 2130 and John Deere 3020, with the call on each
Question21303020Call
Which puts more power through the PTO shaft?55.2 kW (74.0 hp)Traktorenlexikon, “John Deere 2130”55.2 kW (74.0 hp)Traktorenlexikon, “John Deere 3020”Not comparableNot comparable on power at the PTO shaft: the 2130 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 3020 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 2130 and the 3020.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 2130 and the 3020.
Which pumps more oil for implements?47.6 L/min (12.6 gpm)Traktorenlexikon, “John Deere 2130”68.0 L/min (18.0 gpm)Traktorenlexikon, “John Deere 3020”AheadThe John Deere 3020 has 43% more hydraulic flow (20.4 L/min / 5.4 gpm) than the John Deere 2130 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,065 kg (4,553 lb)Traktorenlexikon, “John Deere 2130”1,800 kg (3,968 lb)Traktorenlexikon, “John Deere 3020”AheadThe John Deere 2130 has 15% more lift (265 kg / 584 lb) than the John Deere 3020 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,010 kg (6,636 lb)Traktorenlexikon, “John Deere 2130”3,426 kg (7,553 lb)Traktorenlexikon, “John Deere 3020”Ahead (a fact, not an advantage)The John Deere 3020 is 14% heavier (416 kg / 917 lb) than the John Deere 2130 (both unladen weight, as stated by the source).
Which may carry more ballast and load?4,500 kg (9,921 lb)Traktorenlexikon, “John Deere 2130”5,020 kg (11,067 lb)Traktorenlexikon, “John Deere 3020”AheadThe John Deere 3020 has 12% higher maximum permissible mass (520 kg / 1,146 lb) than the John Deere 2130 (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?8 to 16Traktorenlexikon, “John Deere 2130”8Traktorenlexikon, “John Deere 3020”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 2130 and the 3020.
Which is faster on the road?25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “John Deere 2130”20 km/h (12.4 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “John Deere 3020”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “John Deere 2130”540/1000 rpmTraktorenlexikon, “John Deere 3020”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?No figureNo call on PTO independence: not stated for the 2130 and the 3020.
Which drives on both axles?2WD / 4WDTraktorenlexikon, “John Deere 2130”2WDTraktorenlexikon, “John Deere 3020”AheadThe John Deere 2130 is available with four-wheel drive; the John Deere 3020 is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1972–19791964–1972Ahead (a fact, not an advantage)The John Deere 2130 is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The John Deere 3020 has 43% more hydraulic flow (20.4 L/min / 5.4 gpm) than the John Deere 2130 (both pump flow, as stated by the source).
  • The John Deere 2130 has 15% more lift (265 kg / 584 lb) than the John Deere 3020 (both lift at the hitch ends, as stated by the source).
  • The John Deere 3020 is 14% heavier (416 kg / 917 lb) than the John Deere 2130 (both unladen weight, as stated by the source).
  • The John Deere 3020 has 12% higher maximum permissible mass (520 kg / 1,146 lb) than the John Deere 2130 (both maximum permissible mass, as stated by the source).
  • The John Deere 2130 is available with four-wheel drive; the John Deere 3020 is two-wheel drive (as stated by the sources).
  • The John Deere 2130 is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Not comparable on power at the PTO shaft: the 2130 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 3020 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources