5 material differences · fewer than 12
Tractor oneJohn Deere 2020 (A)1967–1972No measured PTO figureTractor twoLamborghini R-360 (DT)1969–1972No measured PTO figure
Which should you choose?
Read our verdict on the 2020 (A) and the R-360 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
5 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 2020 (A) | R-360 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 59.3 hp | 59.1 hp | — |
| Engine declared | John Deere M 5 BL 4 or 4202 DL-01 | LAMBORGHINI FL-1153 | differs |
| Displacement declared | 3.32 L | 3.74 L | +13% R-360 (DT) |
| Transmission | |||
| Top speed declared | 12.4–18.6 mph · 20–30 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | — | Pedal operated dry WALTERSCHEID double clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Pump flow declared | — | 6.4 gpm · 24.2 L/min | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,379 lb · 2,440 kg | 5,622 lb · 2,550 kg | — |
| Maximum permissible mass declared | 8,818 lb · 4,000 kg | — | — |
| Wheelbase declared | 85.8 in · 2,180 mm | 82.5 in · 2,095 mm | — |
| Length declared | 140.6 in · 3,570 mm | 126.8 in · 3,220 mm | +11% 2020 (A) |
| Width declared | 72.4 in · 1,840 mm | 68.9 in · 1,750 mm | — |
| Ground clearance declared | 13.8 in · 350 mm | — | — |
| Turning radius, braked declared | 10.7 ft · 3.26 m | 11.2 ft · 3.41 m | — |
| Fuel tank declared | 78.0 qt · 73.8 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
John Deere 2020 (A) sources
- Source: Traktorenlexikon, “John Deere 2020”
Lamborghini R-360 (DT) sources
- Source: Traktorenlexikon, “Lamborghini R 360 (DT)”