John Deere 2000 (A) vs SOMECA 450 Special V/E

16 material differences

Tractor one

1993–1996

No measured PTO figure

Tractor two

1978–1982

No measured PTO figure

Which should you choose?

Read our verdict on the 2000 (A) and the 450 Special V/E → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

16 material differences · 1 fields identical or within 5%, which is not counted as material

John Deere 2000 (A) and SOMECA 450 Special V/E, field by field
Field	2000 (A)	450 Special V/E	Gap
Engine
Engine power, claimed claimed	44.4 hp	44.4 hp	—
Engine declared	ZETOR 5201	FIAT-IVECO 8035.01.309	differs
Displacement declared	2.70 L	2.34 L	+15% 2000 (A)
Maximum torque declared	117 lb·ft · 158 N·m	108 lb·ft · 146 N·m	+8% 2000 (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5 mph · 25 km/h	+20% 2000 (A)
Clutch declared	Dry Zetor double clutch	Dry FEREDO double clutch	differs
Hydraulics & hitch
Pump flow declared	8.5 gpm · 32.0 L/min	6.2 gpm · 23.4 L/min	+37% 2000 (A)
Pressure declared	1,160 psi · 80 bar	2,843 psi · 196 bar	+145% 450 Special V/E
Three-point lift at ends declared	4,475 lb · 2,030 kg	3,307 lb · 1,500 kg	+35% 2000 (A)
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	6,382 lb · 2,895 kg	3,858 lb · 1,750 kg	+65% 2000 (A)
Maximum permissible mass declared	12,125 lb · 5,500 kg	—	—
Wheelbase declared	83.2 in · 2,114 mm	75.6 in · 1,920 mm	+10% 2000 (A)
Length declared	143.3 in · 3,640 mm	122.8 in · 3,120 mm	+17% 2000 (A)
Width declared	70.9 in · 1,800 mm	38.6–43.3 in · 980–1,100 mm	differs
Height declared	103.9 in · 2,640 mm	50.8 in · 1,290 mm	+105% 2000 (A)
Ground clearance declared	14.8 in · 375 mm	13.4 in · 340 mm	+10% 2000 (A)
Turning radius, braked declared	—	9.4 ft · 2.85 m	—
Fuel tank declared	74.0 qt · 70.0 L	57.1 qt · 54.0 L	+30% 2000 (A)

Source

Source