11 material differences · fewer than 12
Tractor oneJohn Deere 11201967–1975No measured PTO figureTractor twoRenault N 311957–1962No measured PTO figure
Which should you choose?
Read our verdict on the 1120 and the N 31 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 1120 | N 31 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 48.4 hp | 39.4 hp | +23% 1120 |
| Engine declared | John Deere M 4 BL 4 or 3.164 DL-04 | RENAULT 671/9 | differs |
| Displacement declared | 2.70 L | 2.14 L | +26% 1120 |
| Maximum torque declared | 119 lb·ft · 162 N·m | — | — |
| Transmission | |||
| Top speed declared | 12.4–15.5 mph · 20–25 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | — | Pedal-operated dry FERODO single-plate clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Pump flow declared | 6.0 gpm · 22.6 L/min | 3.7 gpm · 14.0 L/min | +61% 1120 |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,004 lb · 2,270 kg | 3,406 lb · 1,545 kg | +47% 1120 |
| Maximum permissible mass declared | 7,716 lb · 3,500 kg | — | — |
| Wheelbase declared | 80.7 in · 2,050 mm | 68.9 in · 1,750 mm | +17% 1120 |
| Length declared | 135.0 in · 3,430 mm | 123.2 in · 3,130 mm | +10% 1120 |
| Width declared | 66.1–86.6 in · 1,680–2,200 mm | 61.8–83.1 in · 1,570–2,110 mm | differs |
| Ground clearance declared | 20.5 in · 521 mm | 15.7 in · 400 mm | +30% 1120 |
| Turning radius, braked declared | 10.2 ft · 3.10 m | 9.7 ft · 2.95 m | — |
| Fuel tank declared | 66.0 qt · 62.5 L | 42.3 qt · 40.0 L | +56% 1120 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
John Deere 1120 sources
Source
- Source: Traktorenlexikon, “John Deere 1120”
Renault N 31 sources
Source
- Source: Traktorenlexikon, “Renault N, E, V31 R3051”