J.I. Case 970 or SAME Leopard 90-Turbo (DT)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 970 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Leopard 90-Turbo (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The J.I. Case 970 suits loader and hydraulic implement work better on this data: 73% (25.6 L/min / 6.8 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for J.I. Case 970 and SAME Leopard 90-Turbo (DT), with the call on each
Question970Leopard 90-Turbo (DT)Call
Which puts more power through the PTO shaft?63.9 kW (85.7 hp)Traktorenlexikon, “Case 970”64.7 kW (86.8 hp)Traktorenlexikon, “SAME Leopard 90 Turbo”Not comparableNot comparable on power at the PTO shaft: the 970 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Leopard 90-Turbo (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 970 and the Leopard 90-Turbo (DT).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 970 and the Leopard 90-Turbo (DT).
Which pumps more oil for implements?60.6 L/min (16.0 gpm)Traktorenlexikon, “Case 970”35.0 L/min (9.2 gpm)Traktorenlexikon, “SAME Leopard 90 Turbo”AheadThe J.I. Case 970 has 73% more hydraulic flow (25.6 L/min / 6.8 gpm) than the SAME Leopard 90-Turbo (DT) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?—4,760 kg (10,494 lb)Traktorenlexikon, “SAME Leopard 90 Turbo”No figureNo call on three-point lift: no figure on record for the 970.
Which is heavier, for traction?4,620 kg (10,185 lb)Traktorenlexikon, “Case 970”3,450 kg (7,606 lb)Traktorenlexikon, “SAME Leopard 90 Turbo”Ahead (a fact, not an advantage)The J.I. Case 970 is 34% heavier (1,170 kg / 2,579 lb) than the SAME Leopard 90-Turbo (DT) (both unladen weight, as stated by the source).
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the 970 and the Leopard 90-Turbo (DT).
Which has the wider choice of gears?8 to 12Traktorenlexikon, “Case 970”12Traktorenlexikon, “SAME Leopard 90 Turbo”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 970 and the Leopard 90-Turbo (DT).
Which is faster on the road?25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Case 970”25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “SAME Leopard 90 Turbo”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Case 970”540/1000 rpmTraktorenlexikon, “SAME Leopard 90 Turbo”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?——No figureNo call on PTO independence: not stated for the 970 and the Leopard 90-Turbo (DT).
Which drives on both axles?2WDTraktorenlexikon, “Case 970”Two-wheel or four-wheel driveTraktorenlexikon, “SAME Leopard 90 Turbo”AheadThe SAME Leopard 90-Turbo (DT) is available with four-wheel drive; the J.I. Case 970 is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1969–19781982–1984Ahead (a fact, not an advantage)The SAME Leopard 90-Turbo (DT) is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The J.I. Case 970 has 73% more hydraulic flow (25.6 L/min / 6.8 gpm) than the SAME Leopard 90-Turbo (DT) (both pump flow, as stated by the source).
  • The J.I. Case 970 is 34% heavier (1,170 kg / 2,579 lb) than the SAME Leopard 90-Turbo (DT) (both unladen weight, as stated by the source).
  • The SAME Leopard 90-Turbo (DT) is available with four-wheel drive; the J.I. Case 970 is two-wheel drive (as stated by the sources).
  • The SAME Leopard 90-Turbo (DT) is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Not comparable on power at the PTO shaft: the 970 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Leopard 90-Turbo (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources