6 material differences · fewer than 12

Tractor oneJ.I. Case 9401962–1969No measured PTO figureTractor twoLamborghini R-804 (DT)1976–1982No measured PTO figure

Which should you choose?

Read our verdict on the 940 and the R-804 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

6 material differences · 3 fields identical or within 5%, which is not counted as material

J.I. Case 940 and Lamborghini R-804 (DT), field by field
Field940R-804 (DT)Gap
Engine
Engine power, claimed claimed83.0 hp82.9 hp—
Engine declared—LAMBORGHINI FL-1104/2—
Displacement declared—4.56 L—
Transmission
Top speed declared15.5 mph · 25 km/h15.5 mph · 25 km/h—
Clutch declaredpedal-operated dry CASE single-disc clutch——
Hydraulics & hitch
Pump flow declared15.5 gpm · 58.7 L/min——
Rear PTO speeds declared540/1000 rpm540 rpm / 1000 rpmdiffers
Weight & dimensions
Unladen weight declared8,852 lb · 4,015 kg6,327 lb · 2,870 kg+40% 940
Wheelbase declared83.8 in · 2,129 mm89.8 in · 2,280 mm+7% R-804 (DT)
Length declared141.0 in · 3,581 mm131.9 in · 3,350 mm+7% 940
Width declared84.0 in · 2,134 mm68.5–96.1 in · 1,740–2,440 mmdiffers
Ground clearance declared17.5 in · 445 mm18.1 in · 460 mm—
Turning radius, braked declared9.5 ft · 2.90 m——
Fuel tank declared95.9–120.0 qt · 90.8–113.6 L63.4 qt · 60.0 Ldiffers

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

J.I. Case 940 sources

Source
  • Source: Traktorenlexikon, “Case 940”

Lamborghini R-804 (DT) sources

Source
  • Source: Traktorenlexikon, “Lamborghini R 804 DT”