J.I. Case 930 vs Massey Ferguson MF 1085

8 material differences · fewer than 12

Tractor one

1962–1969

No measured PTO figure

Tractor two

1973–1978

No measured PTO figure

Which should you choose?

Read our verdict on the 930 and the MF 1085 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 4 fields identical or within 5%, which is not counted as material

J.I. Case 930 and Massey Ferguson MF 1085, field by field
Field	930	MF 1085	Gap
Engine
Engine power, claimed claimed	83.0 hp	86.8 hp	—
Engine declared	—	Perkins A 4.318	—
Displacement declared	—	5.21 L	—
Maximum torque declared	—	256 lb·ft · 347 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	15.5 mph · 25 km/h	—
Clutch declared	Pedal operated dry CASE single plate clutch	Pedal-operated dry LUK single-plate clutch with 305 mm diameter	differs
Hydraulics & hitch
Pump flow declared	15.5 gpm · 58.7 L/min	7.0 gpm · 26.5 L/min	+122% 930
Pressure declared	—	3,086 psi · 213 bar	—
Three-point lift at ends declared	—	6,173 lb · 2,800 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,752 lb · 3,970 kg	8,490 lb · 3,851 kg	—
Maximum permissible mass declared	—	13,228 lb · 6,000 kg	—
Wheelbase declared	83.8 in · 2,129 mm	97.2 in · 2,470 mm	+16% MF 1085
Length declared	141.0 in · 3,581 mm	153.9 in · 3,910 mm	+9% MF 1085
Width declared	84.0 in · 2,134 mm	114.2 in · 2,900 mm	+36% MF 1085
Height declared	64.3 in · 1,634 mm	79.1 in · 2,010 mm	+23% MF 1085
Ground clearance declared	17.5 in · 445 mm	16.5 in · 420 mm	+6% 930
Turning radius, braked declared	9.5 ft · 2.90 m	—	—
Fuel tank declared	95.9–120.0 qt · 90.8–113.6 L	179.6 qt · 170.0 L	differs

Source

Source