8 material differences · fewer than 12
Tractor oneJ.I. Case 9301962–1969No measured PTO figureTractor twoLeyland 21001972–1980No measured PTO figure
Which should you choose?
Read our verdict on the 930 and the 2100 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 930 | 2100 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 83.0 hp | 100.0 hp | +21% 2100 |
| Engine declared | — | LEYLAND-MOTORS 6/98 NT | — |
| Displacement declared | — | 5.66 L | — |
| Maximum torque declared | — | 276 lb·ft · 374 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 2100 |
| Clutch declared | Pedal operated dry CASE single plate clutch | Dry BORG & BECK double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 15.5 gpm · 58.7 L/min | 11.0 gpm · 41.6 L/min | +41% 930 |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,752 lb · 3,970 kg | 8,911 lb · 4,042 kg | — |
| Wheelbase declared | 83.8 in · 2,129 mm | 90.0 in · 2,286 mm | +7% 2100 |
| Length declared | 141.0 in · 3,581 mm | 150.0 in · 3,810 mm | +6% 2100 |
| Width declared | 84.0 in · 2,134 mm | 85.5 in · 2,172 mm | — |
| Ground clearance declared | 17.5 in · 445 mm | 15.8 in · 402 mm | +11% 930 |
| Turning radius, braked declared | 9.5 ft · 2.90 m | 12.4 ft · 3.77 m | +30% 2100 |
| Fuel tank declared | 95.9–120.0 qt · 90.8–113.6 L | 72.1 qt · 68.2 L | differs |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
J.I. Case 930 sources
Source
- Source: Traktorenlexikon, “Case 930”
Leyland 2100 sources
Source
- Source: Traktorenlexikon, “Leyland 2100”