J.I. Case 770 or Massey Ferguson MF 560?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 770 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 560 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for J.I. Case 770 and Massey Ferguson MF 560, with the call on each
Question770MF 560Call
Which puts more power through the PTO shaft?41.9 kW (56.2 hp)Traktorenlexikon, “Case 770”41.2 kW (55.3 hp)Traktorenlexikon, “Massey Ferguson MF 560”Not comparableNot comparable on power at the PTO shaft: the 770 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 560 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 770 and the MF 560.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 770 and the MF 560.
Which pumps more oil for implements?60.6 L/min (16.0 gpm)Traktorenlexikon, “Case 770”No figureNo call on hydraulic flow: no figure on record for the MF 560.
Which lifts more on the three-point hitch?1,800 kg (3,968 lb)Traktorenlexikon, “Massey Ferguson MF 560”No figureNo call on three-point lift: no figure on record for the 770.
Which is heavier, for traction?4,105 kg (9,050 lb)Traktorenlexikon, “Case 770”2,770 kg (6,107 lb)Traktorenlexikon, “Massey Ferguson MF 560”Ahead (a fact, not an advantage)The J.I. Case 770 is 48% heavier (1,335 kg / 2,943 lb) than the Massey Ferguson MF 560 (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 770 and the MF 560.
Which has the wider choice of gears?8 to 12Traktorenlexikon, “Case 770”8 to 12Traktorenlexikon, “Massey Ferguson MF 560”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 770 and the MF 560.
Which is faster on the road?25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Case 770”25 km/h (15.5 mph)Traktorenlexikon, “Massey Ferguson MF 560”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Case 770”540 rpmTraktorenlexikon, “Massey Ferguson MF 560”AheadThe J.I. Case 770 offers 1000 rpm at the PTO, which the Massey Ferguson MF 560 does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Case 770”independentTraktorenlexikon, “Massey Ferguson MF 560”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WDTraktorenlexikon, “Case 770”2WDTraktorenlexikon, “Massey Ferguson MF 560”EvenEven on drive: all two-wheel drive.
Which is newer, and what about parts?1969–19731976–1979Ahead (a fact, not an advantage)The Massey Ferguson MF 560 is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The J.I. Case 770 is 48% heavier (1,335 kg / 2,943 lb) than the Massey Ferguson MF 560 (both unladen weight, as stated by the source).
  • The J.I. Case 770 offers 1000 rpm at the PTO, which the Massey Ferguson MF 560 does not (as stated by the sources).
  • The Massey Ferguson MF 560 is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO independence: every PTO is independent.
  • Even on drive: all two-wheel drive.
  • Not comparable on power at the PTO shaft: the 770 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 560 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, three-point lift, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources