J.I. Case 540 or Renault 70?

Which should you choose?

On performance, every comparable figure that differs favours the J.I. Case 540: hydraulic flow.

  • The J.I. Case 540 suits loader and hydraulic implement work better on this data: 61% (13.3 L/min / 3.5 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for J.I. Case 540 and Renault 70, with the call on each
Question54070Call
Which puts more power through the PTO shaft?28.5 kW (38.3 hp)Traktorenlexikon, “Case 540”28.6 kW (38.4 hp)Traktorenlexikon, “Renault 70 R7252”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 540 and the 70.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 540 and the 70.
Which pumps more oil for implements?35.2 L/min (9.3 gpm)Traktorenlexikon, “Case 540”21.9 L/min (5.8 gpm)Traktorenlexikon, “Renault 70 R7252”AheadThe J.I. Case 540 has 61% more hydraulic flow (13.3 L/min / 3.5 gpm) than the Renault 70 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?1,920 kg (4,233 lb)Traktorenlexikon, “Renault 70 R7252”No figureNo call on three-point lift: no figure on record for the 540.
Which is heavier, for traction?1,814 kg (3,999 lb)Traktorenlexikon, “Case 540”1,605 kg (3,538 lb)Traktorenlexikon, “Renault 70 R7252”Ahead (a fact, not an advantage)The J.I. Case 540 is 13% heavier (209 kg / 461 lb) than the Renault 70 (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 540 and the 70.
Which has the wider choice of gears?4 to 12Traktorenlexikon, “Case 540”6 to 10Traktorenlexikon, “Renault 70 R7252”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 540 and the 70.
Which is faster on the road?20 km/h (12.4 mph) to 35 km/h (21.7 mph)Traktorenlexikon, “Case 540”25 km/h (15.5 mph)Traktorenlexikon, “Renault 70 R7252”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Case 540”540 rpmTraktorenlexikon, “Renault 70 R7252”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Renault 70 R7252”No figureNo call on PTO independence: not stated for the 540.
Which drives on both axles?2WDTraktorenlexikon, “Case 540”2WDTraktorenlexikon, “Renault 70 R7252”EvenEven on drive: all two-wheel drive.
Which is newer, and what about parts?1960–19691968–1976Ahead (a fact, not an advantage)The Renault 70 is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The J.I. Case 540 has 61% more hydraulic flow (13.3 L/min / 3.5 gpm) than the Renault 70 (both pump flow, as stated by the source).
  • The J.I. Case 540 is 13% heavier (209 kg / 461 lb) than the Renault 70 (both unladen weight, as stated by the source).
  • The Renault 70 is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Even on drive: all two-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources