J.I. Case 470 or Massey Ferguson MF 253 (A)?
Which should you choose?
On performance, every comparable figure that differs favours the J.I. Case 470: hydraulic flow. On features, the Massey Ferguson MF 253 (A) is ahead on top speed and drive.
- The J.I. Case 470 suits loader and hydraulic implement work better on this data: 165% (21.9 L/min / 5.8 gpm) more hydraulic flow.
- The Massey Ferguson MF 253 (A) suits heavy draft work (ploughing, cultivating) better on this data: 23% (401 kg / 884 lb) heavier and four-wheel drive.
- The Massey Ferguson MF 253 (A) suits road haulage better on this data: 50% (10.0 km/h / 6.2 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 470 | MF 253 (A) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 25.3 kW (33.9 hp)Traktorenlexikon, “Case 470” | 24.9 kW (33.3 hp)Traktorenlexikon, “Massey Ferguson MF 253” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 470 and the MF 253 (A). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 470 and the MF 253 (A). |
| Which pumps more oil for implements? | 35.2 L/min (9.3 gpm)Traktorenlexikon, “Case 470” | 13.3 L/min (3.5 gpm)Traktorenlexikon, “Massey Ferguson MF 253” | AheadThe J.I. Case 470 has 165% more hydraulic flow (21.9 L/min / 5.8 gpm) than the Massey Ferguson MF 253 (A) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | — | 1,610 kg (3,549 lb)Traktorenlexikon, “Massey Ferguson MF 253” | No figureNo call on three-point lift: no figure on record for the 470. |
| Which is heavier, for traction? | 1,770 kg (3,902 lb)Traktorenlexikon, “Case 470” | 2,171 kg (4,786 lb)Traktorenlexikon, “Massey Ferguson MF 253” | Ahead (a fact, not an advantage)The Massey Ferguson MF 253 (A) is 23% heavier (401 kg / 884 lb) than the J.I. Case 470 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 470 and the MF 253 (A). |
| Which has the wider choice of gears? | 4 to 8Traktorenlexikon, “Case 470” | 8Traktorenlexikon, “Massey Ferguson MF 253” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 470 and the MF 253 (A). |
| Which is faster on the road? | 20 km/h (12.4 mph)Traktorenlexikon, “Case 470” | 30 km/h (18.6 mph)Traktorenlexikon, “Massey Ferguson MF 253” | AheadThe Massey Ferguson MF 253 (A) has 50% more top speed (10.0 km/h / 6.2 mph) than the J.I. Case 470 (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540 rpmTraktorenlexikon, “Case 470” | 540 rpmTraktorenlexikon, “Massey Ferguson MF 253” | EvenEven on PTO speeds: the same speeds (540 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Case 470” | independentTraktorenlexikon, “Massey Ferguson MF 253” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 2WDTraktorenlexikon, “Case 470” | 2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 253” | AheadThe Massey Ferguson MF 253 (A) is available with four-wheel drive; the J.I. Case 470 is two-wheel drive (as stated by the sources). |
| Which is newer, and what about parts? | 1969–1973 | 1983–1987 | Ahead (a fact, not an advantage)The Massey Ferguson MF 253 (A) is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The J.I. Case 470 has 165% more hydraulic flow (21.9 L/min / 5.8 gpm) than the Massey Ferguson MF 253 (A) (both pump flow, as stated by the source).
- The Massey Ferguson MF 253 (A) is 23% heavier (401 kg / 884 lb) than the J.I. Case 470 (both unladen weight, as stated by the source).
- The Massey Ferguson MF 253 (A) has 50% more top speed (10.0 km/h / 6.2 mph) than the J.I. Case 470 (both top speed forward, as stated by the source).
- The Massey Ferguson MF 253 (A) is available with four-wheel drive; the J.I. Case 470 is two-wheel drive (as stated by the sources).
- The Massey Ferguson MF 253 (A) is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540 rpm).
- Even on PTO independence: every PTO is independent.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources