J.I. Case 470 or Massey Ferguson MF 230?

Which should you choose?

On performance, every comparable figure that differs favours the J.I. Case 470: hydraulic flow. On features, the Massey Ferguson MF 230 is ahead on top speed.

  • The J.I. Case 470 suits loader and hydraulic implement work better on this data: 107% (18.2 L/min / 4.8 gpm) more hydraulic flow.
  • The Massey Ferguson MF 230 suits road haulage better on this data: 25% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for J.I. Case 470 and Massey Ferguson MF 230, with the call on each
Question470MF 230Call
Which puts more power through the PTO shaft?25.3 kW (33.9 hp)Traktorenlexikon, “Case 470”25.4 kW (34.0 hp)Traktorenlexikon, “Massey Ferguson MF 230”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 470 and the MF 230.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 470 and the MF 230.
Which pumps more oil for implements?35.2 L/min (9.3 gpm)Traktorenlexikon, “Case 470”17.0 L/min (4.5 gpm)Traktorenlexikon, “Massey Ferguson MF 230”AheadThe J.I. Case 470 has 107% more hydraulic flow (18.2 L/min / 4.8 gpm) than the Massey Ferguson MF 230 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?1,415 kg (3,120 lb)Traktorenlexikon, “Massey Ferguson MF 230”No figureNo call on three-point lift: no figure on record for the 470.
Which is heavier, for traction?1,770 kg (3,902 lb)Traktorenlexikon, “Case 470”1,730 kg (3,814 lb)Traktorenlexikon, “Massey Ferguson MF 230”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 470 and the MF 230.
Which has the wider choice of gears?4 to 8Traktorenlexikon, “Case 470”6 to 8Traktorenlexikon, “Massey Ferguson MF 230”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 470 and the MF 230.
Which is faster on the road?20 km/h (12.4 mph)Traktorenlexikon, “Case 470”25 km/h (15.5 mph)Traktorenlexikon, “Massey Ferguson MF 230”AheadThe Massey Ferguson MF 230 has 25% more top speed (5.0 km/h / 3.1 mph) than the J.I. Case 470 (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Case 470”540 rpmTraktorenlexikon, “Massey Ferguson MF 230”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Case 470”independentTraktorenlexikon, “Massey Ferguson MF 230”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WDTraktorenlexikon, “Case 470”2WDTraktorenlexikon, “Massey Ferguson MF 230”EvenEven on drive: all two-wheel drive.
Which is newer, and what about parts?1969–19731976–1983Ahead (a fact, not an advantage)The Massey Ferguson MF 230 is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The J.I. Case 470 has 107% more hydraulic flow (18.2 L/min / 4.8 gpm) than the Massey Ferguson MF 230 (both pump flow, as stated by the source).
  • The Massey Ferguson MF 230 has 25% more top speed (5.0 km/h / 3.1 mph) than the J.I. Case 470 (both top speed forward, as stated by the source).
  • The Massey Ferguson MF 230 is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: all two-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources