J.I. Case 4490 or New Holland-Fiat G 210?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 4490 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the G 210 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The New Holland-Fiat G 210 suits loader and hydraulic implement work better on this data: 14% (13.1 L/min / 3.5 gpm) more hydraulic flow and 83% (4,121 kg / 9,085 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 4490 | G 210 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 154.5 kW (207.2 hp)Traktorenlexikon, “Case 4490” | 154.6 kW (207.3 hp)Traktorenlexikon, “Fiatagri G210” | Not comparableNot comparable on power at the PTO shaft: the 4490 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the G 210 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 4490 and the G 210. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 4490 and the G 210. |
| Which pumps more oil for implements? | 90.8 L/min (24.0 gpm)Traktorenlexikon, “Case 4490” | 103.9 L/min (27.4 gpm)Traktorenlexikon, “Fiatagri G210” | AheadThe New Holland-Fiat G 210 has 14% more hydraulic flow (13.1 L/min / 3.5 gpm) than the J.I. Case 4490 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 4,990 kg (11,001 lb)Traktorenlexikon, “Case 4490” | 9,111 kg (20,086 lb)Traktorenlexikon, “Fiatagri G210” | AheadThe New Holland-Fiat G 210 has 83% more lift (4,121 kg / 9,085 lb) than the J.I. Case 4490 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 9,453 kg (20,840 lb)Traktorenlexikon, “Case 4490” | 9,000 kg (19,842 lb)Traktorenlexikon, “Fiatagri G210” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | — | 13,650 kg (30,093 lb)Traktorenlexikon, “Fiatagri G210” | No figureNo call on maximum permissible mass: no figure on record for the 4490. |
| Which has the wider choice of gears? | 12Traktorenlexikon, “Case 4490” | 16 to 18Traktorenlexikon, “Fiatagri G210” | AheadThe New Holland-Fiat G 210 has 33% more forward gears (4 gears) than the J.I. Case 4490 (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 4490 and the G 210. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Case 4490” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fiatagri G210” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 1000 rpmTraktorenlexikon, “Case 4490” | 1000 rpmTraktorenlexikon, “Fiatagri G210” | EvenEven on PTO speeds: the same speeds (1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Case 4490” | independentTraktorenlexikon, “Fiatagri G210” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Case 4490” | 4WDTraktorenlexikon, “Fiatagri G210” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1979–1983 | 1993–2003 | Ahead (a fact, not an advantage)The New Holland-Fiat G 210 is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The New Holland-Fiat G 210 has 14% more hydraulic flow (13.1 L/min / 3.5 gpm) than the J.I. Case 4490 (both pump flow, as stated by the source).
- The New Holland-Fiat G 210 has 83% more lift (4,121 kg / 9,085 lb) than the J.I. Case 4490 (both lift at the hitch ends, as stated by the source).
- The New Holland-Fiat G 210 has 33% more forward gears (4 gears) than the J.I. Case 4490 (both forward gears, as stated by the source).
- The New Holland-Fiat G 210 is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the 4490 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the G 210 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources