8 material differences · fewer than 12

Tractor oneJ.I. Case 4311960–1969No measured PTO figureTractor twoMassey-Harris-Ferguson FE 35 Spezial1956–1960No measured PTO figure

Which should you choose?

Read our verdict on the 431 and the FE 35 Spezial → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

8 material differences · 1 fields identical or within 5%, which is not counted as material

J.I. Case 431 and Massey-Harris-Ferguson FE 35 Spezial, field by field
Field431FE 35 SpezialGap
Engine
Engine power, claimed claimed35.0 hp32.6 hp+7% 431
Engine declaredCASE G-188 DStandard-Motors 23-Cdiffers
Displacement declared3.09 L——
Transmission
Top speed declared12.4–21.7 mph · 20–35 km/h12.4 mph · 20 km/hdiffers
Hydraulics & hitch
Pump flow declared8.5 gpm · 32.2 L/min——
Pressure declared—2,489 psi · 172 bar—
Rear PTO speeds declared540 rpm540 rpm—
Weight & dimensions
Unladen weight declared3,838 lb · 1,741 kg3,208 lb · 1,455 kg+20% 431
Wheelbase declared85.0 in · 2,159 mm72.0 in · 1,830 mm+18% 431
Length declared130.1 in · 3,305 mm109.9 in · 2,792 mm+18% 431
Width declared79.6 in · 2,022 mm63.8 in · 1,620 mm+25% 431
Ground clearance declared20.1 in · 510 mm12.2 in · 310 mm+65% 431
Turning radius, braked declared7.9 ft · 2.41 m9.5 ft · 2.90 m+20% FE 35 Spezial
Fuel tank declared40.8 qt · 38.6 L——

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

J.I. Case 431 sources

Source
  • Source: Traktorenlexikon, “Case 431”

Massey-Harris-Ferguson FE 35 Spezial sources

Source
  • Source: Traktorenlexikon, “Massey Ferguson FE 35 Spezial”