8 material differences · fewer than 12
Tractor oneJ.I. Case 4111955–1957No measured PTO figureTractor twoMassey Ferguson MF 651958–1961No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (47%); they were not built in overlapping years (1955–1957; 1958–1961). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
8 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 411 | MF 65 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 49.3 hp | 57 hp | +16% MF 65 |
| Engine declared | — | Perkins A 4-192 Y | — |
| Displacement declared | — | 3.35 L | — |
| Maximum torque declared | — | 136 lb·ft · 184 N·m | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 12.4 mph · 20 km/h | — |
| Clutch declared | Pedal operated single plate clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 12.0 gpm · 45.4 L/min | 4.0 gpm · 15.1 L/min | +201% 411 |
| Pressure declared | — | 2,489 psi · 172 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,318 lb · 2,866 kg | 4,299 lb · 1,950 kg | +47% 411 |
| Wheelbase declared | 91.5 in · 2,324 mm | 84.2 in · 2,138 mm | +9% 411 |
| Length declared | 142.6 in · 3,622 mm | 131.3 in · 3,335 mm | +9% 411 |
| Width declared | 85.2 in · 2,164 mm | 72.4 in · 1,840 mm | +18% 411 |
| Height, over the steering wheel declared | 74.4 in · 1,890 mm | 63.4 in · 1,610 mm | +17% 411 |
| Ground clearance declared | 24.2 in · 615 mm | 14.3 in · 362 mm | +70% 411 |
| Turning radius, braked declared | — | 11.5 ft · 3.50 m | — |
| Fuel tank declared | 84.0 qt · 79.5 L | 52.8 qt · 50 L | +59% 411 |
J.I. Case 411 sources
Source
- Source: Traktorenlexikon, “Case 411”
Massey Ferguson MF 65 sources
Source
- Source: Traktorenlexikon, “Massey Ferguson MF 65”