J.I. Case 2594 (DT) or New Holland 8770 A?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 2594 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8770 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The New Holland 8770A suits loader and hydraulic implement work better on this data: 23% (1,380 kg / 3,042 lb) more three-point lift.
  • The New Holland 8770A suits heavy draft work (ploughing, cultivating) better on this data: 18% (1,318 kg / 2,906 lb) heavier and four-wheel drive.
  • The New Holland 8770A suits road haulage better on this data: 33% (10.0 km/h / 6.2 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for J.I. Case 2594 (DT) and New Holland 8770 A, with the call on each
Question2594 (DT)8770 ACall
Which puts more power through the PTO shaft?139.7 kW (187.3 hp)Traktorenlexikon, “Case 2594”139.7 kW (187.3 hp)Traktorenlexikon, “New Holland 8770 A”Not comparableNot comparable on power at the PTO shaft: the 2594 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8770 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 2594 (DT) and the 8770 A.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 2594 (DT) and the 8770 A.
Which pumps more oil for implements?—126.1 L/min (33.3 gpm)Traktorenlexikon, “New Holland 8770 A”No figureNo call on hydraulic flow: no figure on record for the 2594 (DT).
Which lifts more on the three-point hitch?6,100 kg (13,448 lb)Traktorenlexikon, “Case 2594”7,480 kg (16,491 lb)Traktorenlexikon, “New Holland 8770 A”AheadThe New Holland 8770A has 23% more lift (1,380 kg / 3,042 lb) than the J.I. Case 2594 (DT) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?7,430 kg (16,380 lb)Traktorenlexikon, “Case 2594”8,748 kg (19,286 lb)Traktorenlexikon, “New Holland 8770 A”Ahead (a fact, not an advantage)The New Holland 8770A is 18% heavier (1,318 kg / 2,906 lb) than the J.I. Case 2594 (DT) (both unladen weight, as stated by the source).
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the 2594 (DT) and the 8770 A.
Which has the wider choice of gears?12 to 24Traktorenlexikon, “Case 2594”18 to 36Traktorenlexikon, “New Holland 8770 A”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 2594 (DT) and the 8770 A.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Case 2594”40 km/h (24.9 mph)Traktorenlexikon, “New Holland 8770 A”AheadThe New Holland 8770A has 33% more top speed (10.0 km/h / 6.2 mph) than the J.I. Case 2594 (DT) (both top speed forward, as stated by the source).
Which offers more PTO speeds?1000 rpmTraktorenlexikon, “Case 2594”1000 rpmTraktorenlexikon, “New Holland 8770 A”EvenEven on PTO speeds: the same speeds (1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Case 2594”—No figureNo call on PTO independence: not stated for the 8770 A.
Which drives on both axles?2WDTraktorenlexikon, “Case 2594”4WDTraktorenlexikon, “New Holland 8770 A”AheadThe New Holland 8770A is available with four-wheel drive; the J.I. Case 2594 (DT) is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1984–19851993–2002Ahead (a fact, not an advantage)The New Holland 8770A is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The New Holland 8770A has 23% more lift (1,380 kg / 3,042 lb) than the J.I. Case 2594 (DT) (both lift at the hitch ends, as stated by the source).
  • The New Holland 8770A is 18% heavier (1,318 kg / 2,906 lb) than the J.I. Case 2594 (DT) (both unladen weight, as stated by the source).
  • The New Holland 8770A has 33% more top speed (10.0 km/h / 6.2 mph) than the J.I. Case 2594 (DT) (both top speed forward, as stated by the source).
  • The New Holland 8770A is available with four-wheel drive; the J.I. Case 2594 (DT) is two-wheel drive (as stated by the sources).
  • The New Holland 8770A is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (1000 rpm).
  • Not comparable on power at the PTO shaft: the 2594 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8770 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources