J.I. Case 2294 (DT) vs SOMECA 1300 (TD)

11 material differences · fewer than 12

Tractor one

1984–1985

No measured PTO figure

Tractor two

1974–1977

No measured PTO figure

Which should you choose?

Read our verdict on the 2294 (DT) and the 1300 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

J.I. Case 2294 (DT) and SOMECA 1300 (TD), field by field
Field	2294 (DT)	1300 (TD)	Gap
Engine
Engine power, claimed claimed	139.1 hp	128.2 hp	+8% 2294 (DT)
Engine declared	CASE 504 BDT	O.M.-FIAT CP-3/100 Var.16	differs
Displacement declared	8.26 L	7.41 L	+11% 2294 (DT)
Maximum torque declared	470 lb·ft · 637 N·m	356 lb·ft · 482 N·m	+32% 2294 (DT)
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5 mph · 25 km/h	+20% 2294 (DT)
Clutch declared	pedal-operated wet disc clutch	Pedal operated dry FERODO single disc clutch 14 inch	differs
Hydraulics & hitch
Pump flow declared	—	12.6 gpm · 47.7 L/min	—
Pressure declared	—	2,901–3,336 psi · 200–230 bar	—
Three-point lift at ends declared	9,998 lb · 4,535 kg	7,275 lb · 3,300 kg	+37% 2294 (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	14,390 lb · 6,527 kg	12,456 lb · 5,650 kg	+16% 2294 (DT)
Wheelbase declared	104.0–110.0 in · 2,642–2,794 mm	108.3 in · 2,750 mm	—
Length declared	175.5 in · 4,458 mm	175.6 in · 4,460 mm	—
Width declared	96.0 in · 2,438 mm	85.4 in · 2,170 mm	+12% 2294 (DT)
Height declared	116.5 in · 2,960 mm	111.8 in · 2,840 mm	—
Ground clearance declared	19.5 in · 495 mm	25.0 in · 635 mm	+28% 1300 (TD)
Turning radius, braked declared	13.5 ft · 4.12 m	14.4 ft · 4.40 m	+7% 1300 (TD)
Fuel tank declared	259.9 qt · 246.0 L	216.6 qt · 205.0 L	+20% 2294 (DT)

Source

Source