J.I. Case 2294 (DT) vs Massey Ferguson MF 3630

9 material differences · fewer than 12

Tractor one

1984–1985

No measured PTO figure

Tractor two

1987–1990

No measured PTO figure

Which should you choose?

Read our verdict on the 2294 (DT) and the MF 3630 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 4 fields identical or within 5%, which is not counted as material

J.I. Case 2294 (DT) and Massey Ferguson MF 3630, field by field
Field	2294 (DT)	MF 3630	Gap
Engine
Engine power, claimed claimed	139.1 hp	131.3 hp	+6% 2294 (DT)
Engine declared	CASE 504 BDT	Perkins AT 6.354.4	differs
Displacement declared	8.26 L	5.80 L	+42% 2294 (DT)
Maximum torque declared	470 lb·ft · 637 N·m	330 lb·ft · 447 N·m	+43% 2294 (DT)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	pedal-operated wet disc clutch	—	—
Hydraulics & hitch
Pressure declared	—	2,277–2,350 psi · 157–162 bar	—
Three-point lift at ends declared	9,998 lb · 4,535 kg	13,536 lb · 6,140 kg	+35% MF 3630
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	14,390 lb · 6,527 kg	11,916 lb · 5,405 kg	+21% 2294 (DT)
Wheelbase declared	104.0–110.0 in · 2,642–2,794 mm	109.3 in · 2,777 mm	—
Length declared	175.5 in · 4,458 mm	183.0 in · 4,649 mm	—
Width declared	96.0 in · 2,438 mm	82.2 in · 2,088 mm	+17% 2294 (DT)
Height declared	116.5 in · 2,960 mm	114.4 in · 2,905 mm	—
Ground clearance declared	19.5 in · 495 mm	16.9 in · 428 mm	+16% 2294 (DT)
Turning radius, braked declared	13.5 ft · 4.12 m	—	—
Fuel tank declared	259.9 qt · 246.0 L	274.7 qt · 260.0 L	+6% MF 3630

Source

Source