J.I. Case 2290 or Massey Ferguson MF 1134 (A)?

Which should you choose?

The figures split: the J.I. Case 2290 is ahead on hydraulic flow; the Massey Ferguson MF 1134 (A) is ahead on three-point lift and drive.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for J.I. Case 2290 and Massey Ferguson MF 1134 (A), with the call on each
Question2290MF 1134 (A)Call
Which puts more power through the PTO shaft?96.0 kW (128.7 hp)Traktorenlexikon, “Case 2290”96.6 kW (129.5 hp)Traktorenlexikon, “Massey Ferguson MF 1134”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 2290 and the MF 1134 (A).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 2290 and the MF 1134 (A).
Which pumps more oil for implements?79.5 L/min (21.0 gpm)Traktorenlexikon, “Case 2290”58.5 L/min (15.5 gpm)Traktorenlexikon, “Massey Ferguson MF 1134”AheadThe J.I. Case 2290 has 36% more hydraulic flow (21.0 L/min / 5.5 gpm) than the Massey Ferguson MF 1134 (A) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?4,500 kg (9,921 lb)Traktorenlexikon, “Case 2290”5,400 kg (11,905 lb)Traktorenlexikon, “Massey Ferguson MF 1134”AheadThe Massey Ferguson MF 1134 (A) has 20% more lift (900 kg / 1,984 lb) than the J.I. Case 2290 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?5,792 kg (12,769 lb) to 6,214 kg (13,700 lb)Traktorenlexikon, “Case 2290”5,050 kg (11,133 lb)Traktorenlexikon, “Massey Ferguson MF 1134”Ahead (a fact, not an advantage)The J.I. Case 2290 is 15% heavier (742 kg / 1,636 lb) than the Massey Ferguson MF 1134 (A) (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 2290 and the MF 1134 (A).
Which has the wider choice of gears?8 to 12Traktorenlexikon, “Case 2290”12Traktorenlexikon, “Massey Ferguson MF 1134”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 2290 and the MF 1134 (A).
Which is faster on the road?25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Case 2290”25 km/h (15.5 mph)Traktorenlexikon, “Massey Ferguson MF 1134”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Case 2290”540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 1134”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Case 2290”independentTraktorenlexikon, “Massey Ferguson MF 1134”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WDTraktorenlexikon, “Case 2290”2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 1134”AheadThe Massey Ferguson MF 1134 (A) is available with four-wheel drive; the J.I. Case 2290 is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1978–19831978–1990EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The J.I. Case 2290 has 36% more hydraulic flow (21.0 L/min / 5.5 gpm) than the Massey Ferguson MF 1134 (A) (both pump flow, as stated by the source).
  • The Massey Ferguson MF 1134 (A) has 20% more lift (900 kg / 1,984 lb) than the J.I. Case 2290 (both lift at the hitch ends, as stated by the source).
  • The J.I. Case 2290 is 15% heavier (742 kg / 1,636 lb) than the Massey Ferguson MF 1134 (A) (both unladen weight, as stated by the source).
  • The Massey Ferguson MF 1134 (A) is available with four-wheel drive; the J.I. Case 2290 is two-wheel drive (as stated by the sources).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources