5 material differences · fewer than 12
Tractor oneJ.I. Case 22-401919–1924No measured PTO figureTractor twoLanz FMD1921–1925No measured PTO figure
Which should you choose?
Read our verdict on the 22-40 and the FMD → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
5 material differences · 0 fields identical or within 5%, which is not counted as material
| Field | 22-40 | FMD | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 40.1 hp | 37.3 hp | +8% 22-40 |
| Transmission | |||
| Top speed declared | 3.2 mph · 5.15 km/h | 4.3 mph · 6.9 km/h | +34% FMD |
| Clutch declared | — | Pedal operated cone clutch | — |
| Weight & dimensions | |||
| Unladen weight declared | 9,200 lb · 4,173 kg | 8,378 lb · 3,800 kg | +10% 22-40 |
| Wheelbase declared | 96.0 in · 2,438 mm | 88.6 in · 2,250 mm | +8% 22-40 |
| Length declared | 153.0 in · 3,886 mm | 144.7 in · 3,675 mm | +6% 22-40 |
| Width declared | 82.5 in · 2,096 mm | 63.0 in · 1,600 mm | +31% 22-40 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
J.I. Case 22-40 sources
Source
- Source: Traktorenlexikon, “Case 22-40”
Lanz FMD sources
Source
- Source: Traktorenlexikon, “Lanz Feldmotor-FMD”