J.I. Case 2094 or Steyr 8140 (a)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 2094 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8140 (a) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The J.I. Case 2094 suits loader and hydraulic implement work better on this data: 106% (2,335 kg / 5,148 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 2094 | 8140 (a) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 89 kW (119 hp)Traktorenlexikon, “Case 2094” | 88.3 kW (118.4 hp)Traktorenlexikon, “Steyr 8140” | Not comparableNot comparable on power at the PTO shaft: the 2094 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8140 (a) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 2094 and the 8140 (a). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 2094 and the 8140 (a). |
| Which pumps more oil for implements? | — | 40.9 L/min (10.8 gpm)Traktorenlexikon, “Steyr 8140” | No figureNo call on hydraulic flow: no figure on record for the 2094. |
| Which lifts more on the three-point hitch? | 4,535 kg (9,998 lb)Traktorenlexikon, “Case 2094” | 2,200 kg (4,850 lb)Traktorenlexikon, “Steyr 8140” | AheadThe J.I. Case 2094 has 106% more lift (2,335 kg / 5,148 lb) than the Steyr 8140 (a) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 6,436 kg (14,189 lb)Traktorenlexikon, “Case 2094” | 4,650 kg (10,251 lb)Traktorenlexikon, “Steyr 8140” | Ahead (a fact, not an advantage)The J.I. Case 2094 is 38% heavier (1,786 kg / 3,937 lb) than the Steyr 8140 (a) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 2094 and the 8140 (a). |
| Which has the wider choice of gears? | 12Traktorenlexikon, “Case 2094” | 12Traktorenlexikon, “Steyr 8140” | EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 2094 and the 8140 (a). |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Case 2094” | 30 km/h (18.6 mph)Traktorenlexikon, “Steyr 8140” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Case 2094” | 540/1000 rpmTraktorenlexikon, “Steyr 8140” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Steyr 8140” | No figureNo call on PTO independence: not stated for the 2094. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Case 2094” | Two-wheel or four-wheel driveTraktorenlexikon, “Steyr 8140” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1984–1985 | 1977–1982 | Ahead (a fact, not an advantage)The J.I. Case 2094 is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The J.I. Case 2094 has 106% more lift (2,335 kg / 5,148 lb) than the Steyr 8140 (a) (both lift at the hitch ends, as stated by the source).
- The J.I. Case 2094 is 38% heavier (1,786 kg / 3,937 lb) than the Steyr 8140 (a) (both unladen weight, as stated by the source).
- The J.I. Case 2094 is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.
- Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the 2094 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8140 (a) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources