J.I. Case 2094 or Massey Ferguson MF 1114?

Which should you choose?

On performance, every comparable figure that differs favours the J.I. Case 2094: three-point lift. It is also ahead on top speed.

  • The J.I. Case 2094 suits loader and hydraulic implement work better on this data: 16% (635 kg / 1,400 lb) more three-point lift.
  • The J.I. Case 2094 suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for J.I. Case 2094 and Massey Ferguson MF 1114, with the call on each
Question2094MF 1114Call
Which puts more power through the PTO shaft?82.4 kW (110.5 hp)Traktorenlexikon, “Case 2094”82.7 kW (111.0 hp)Traktorenlexikon, “Massey Ferguson MF 1114”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 2094 and the MF 1114.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 2094 and the MF 1114.
Which pumps more oil for implements?No figureNo call on hydraulic flow: no figure on record for the 2094 and the MF 1114.
Which lifts more on the three-point hitch?4,535 kg (9,998 lb)Traktorenlexikon, “Case 2094”3,900 kg (8,598 lb)Traktorenlexikon, “Massey Ferguson MF 1114”AheadThe J.I. Case 2094 has 16% more lift (635 kg / 1,400 lb) than the Massey Ferguson MF 1114 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?6,436 kg (14,189 lb)Traktorenlexikon, “Case 2094”4,850 kg (10,692 lb)Traktorenlexikon, “Massey Ferguson MF 1114”Ahead (a fact, not an advantage)The J.I. Case 2094 is 33% heavier (1,586 kg / 3,497 lb) than the Massey Ferguson MF 1114 (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 2094 and the MF 1114.
Which has the wider choice of gears?12Traktorenlexikon, “Case 2094”12Traktorenlexikon, “Massey Ferguson MF 1114”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 2094 and the MF 1114.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Case 2094”25 km/h (15.5 mph)Traktorenlexikon, “Massey Ferguson MF 1114”AheadThe J.I. Case 2094 has 20% more top speed (5.0 km/h / 3.1 mph) than the Massey Ferguson MF 1114 (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Case 2094”540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 1114”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Massey Ferguson MF 1114”No figureNo call on PTO independence: not stated for the 2094.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Case 2094”2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 1114”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1984–19851978–1990Ahead (a fact, not an advantage)The J.I. Case 2094 is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The J.I. Case 2094 has 16% more lift (635 kg / 1,400 lb) than the Massey Ferguson MF 1114 (both lift at the hitch ends, as stated by the source).
  • The J.I. Case 2094 is 33% heavier (1,586 kg / 3,497 lb) than the Massey Ferguson MF 1114 (both unladen weight, as stated by the source).
  • The J.I. Case 2094 has 20% more top speed (5.0 km/h / 3.1 mph) than the Massey Ferguson MF 1114 (both top speed forward, as stated by the source).
  • The J.I. Case 2094 is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources