J.I. Case 2090 vs VALMET 8100

12 material differences

Tractor one

1978–1983

No measured PTO figure

Tractor two

1990–1996

No measured PTO figure

Which should you choose?

Read our verdict on the 2090 and the 8100 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

J.I. Case 2090 and VALMET 8100, field by field
Field	2090	8100	Gap
Engine
Engine power, claimed claimed	118.4 hp	118.4 hp	—
Engine declared	CASE 504 BD	VALMET 620 D	differs
Displacement declared	8.26 L	6.59 L	+25% 2090
Maximum torque declared	318 lb·ft · 431 N·m	311 lb·ft · 421 N·m	—
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated wet disc clutch	Pedal-operated dry Fichtel & Sachs single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	21.0 gpm · 79.5 L/min	17.8 gpm · 67.4 L/min	+18% 2090
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	9,921 lb · 4,500 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,909–12,031 lb · 5,402–5,457 kg	10,141 lb · 4,600 kg	differs
Maximum permissible mass declared	—	16,535 lb · 7,500 kg	—
Wheelbase declared	104.0 in · 2,642 mm	100.7 in · 2,558 mm	—
Length declared	161.8 in · 4,110 mm	186.8 in · 4,745 mm	+15% 8100
Width declared	79.1 in · 2,010 mm	86.6 in · 2,200 mm	+9% 8100
Height declared	115.0 in · 2,921 mm	108.7 in · 2,760 mm	+6% 2090
Ground clearance declared	21.0 in · 533 mm	18.7 in · 475 mm	+12% 2090
Turning radius, braked declared	11.8 ft · 3.61 m	15.5 ft · 4.71 m	+30% 8100
Fuel tank declared	259.9 qt · 246.0 L	174.4 qt · 165.0 L	+49% 2090

Source

Source