J.I. Case 1896 (DT) or Massey Ferguson MF 2625?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 1896 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 2625 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Massey Ferguson 2625 suits loader and hydraulic implement work better on this data: 83% (2,487 kg / 5,483 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for J.I. Case 1896 (DT) and Massey Ferguson MF 2625, with the call on each
Question1896 (DT)MF 2625Call
Which puts more power through the PTO shaft?69.9 kW (93.7 hp)Traktorenlexikon, “Case 1896”69.9 kW (93.7 hp)Traktorenlexikon, “Massey Ferguson MF 2625”Not comparableNot comparable on power at the PTO shaft: the 1896 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 2625 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 1896 (DT) and the MF 2625.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 1896 (DT) and the MF 2625.
Which pumps more oil for implements?——No figureNo call on hydraulic flow: no figure on record for the 1896 (DT) and the MF 2625.
Which lifts more on the three-point hitch?2,993 kg (6,598 lb)Traktorenlexikon, “Case 1896”5,480 kg (12,081 lb)Traktorenlexikon, “Massey Ferguson MF 2625”AheadThe Massey Ferguson 2625 has 83% more lift (2,487 kg / 5,483 lb) than the J.I. Case 1896 (DT) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?5,375 kg (11,850 lb)Traktorenlexikon, “Case 1896”5,450 kg (12,015 lb)Traktorenlexikon, “Massey Ferguson MF 2625”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?—7,500 kg (16,535 lb)Traktorenlexikon, “Massey Ferguson MF 2625”No figureNo call on maximum permissible mass: no figure on record for the 1896 (DT).
Which has the wider choice of gears?12Traktorenlexikon, “Case 1896”16Traktorenlexikon, “Massey Ferguson MF 2625”AheadThe Massey Ferguson 2625 has 33% more forward gears (4 gears) than the J.I. Case 1896 (DT) (both forward gears, as stated by the source).
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 1896 (DT) and the MF 2625.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Case 1896”30 km/h (18.6 mph)Traktorenlexikon, “Massey Ferguson MF 2625”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Case 1896”540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 2625”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Case 1896”independentTraktorenlexikon, “Massey Ferguson MF 2625”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Case 1896”Two-wheel or four-wheel driveTraktorenlexikon, “Massey Ferguson MF 2625”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1984–19851985–1986EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Massey Ferguson 2625 has 83% more lift (2,487 kg / 5,483 lb) than the J.I. Case 1896 (DT) (both lift at the hitch ends, as stated by the source).
  • The Massey Ferguson 2625 has 33% more forward gears (4 gears) than the J.I. Case 1896 (DT) (both forward gears, as stated by the source).
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 1896 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 2625 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources