J.I. Case 1570 vs John Deere 4840
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the 1570 and the 4840 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 1570 | 4840 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 179.6 hp | 178.6 hp | — |
| Engine declared | CASE A-504 T | John Deere 6.466 AT | differs |
| Displacement declared | 8.26 L | 7.64 L | +8% 1570 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal operated wet multi-disc clutch | Hydraulically operated oil-cooled double-plate clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Closed centre | — |
| Pump flow declared | 20.0 gpm · 75.7 L/min | 23.0 gpm · 87.1 L/min | +15% 4840 |
| Pressure declared | — | 3,481 psi · 240 bar | — |
| Three-point lift at ends declared | 7,937 lb · 3,600 kg | 8,294 lb · 3,762 kg | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 16,290 lb · 7,389 kg | 14,899 lb · 6,758 kg | +9% 1570 |
| Wheelbase declared | 104.0 in · 2,642 mm | 118.5 in · 3,010 mm | +14% 4840 |
| Length declared | 182.0 in · 4,623 mm | 176.8 in · 4,490 mm | — |
| Width declared | 96.0 in · 2,438 mm | 95.7 in · 2,430 mm | — |
| Height declared | 116.0 in · 2,946 mm | 116.9 in · 2,970 mm | — |
| Ground clearance declared | 20.0 in · 508 mm | — | — |
| Turning radius, braked declared | 12.6 ft · 3.84 m | 13.5 ft · 4.10 m | +7% 4840 |
| Fuel tank declared | 320.0 qt · 302.8 L | 412.0 qt · 389.9 L | +29% 4840 |
J.I. Case 1570 sources
Source
- Source: Traktorenlexikon, “Case 1570”
John Deere 4840 sources
Source
- Source: Traktorenlexikon, “John Deere 4840”