4 material differences · fewer than 12

Tractor oneJ.I. Case 15-271919–1924No measured PTO figureTractor twoLanz D 9511from 1934No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (32%); they were not built in overlapping years (1919–1924; 1934–1934). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

4 material differences · 2 fields identical or within 5%, which is not counted as material

J.I. Case 15-27 and Lanz D 9511, field by field
Field15-27D 9511Gap
Engine
Engine power, claimed claimed27.1 hp29.5 hp+9% D 9511
Transmission
Top speed declared3.0 mph · 4.83 km/h9.9 mph · 15.9 km/h+229% D 9511
Clutch declaredHand lever-operated twin-disc clutchPedal operated three-jaw clutch with clutch brakediffers
Hydraulics & hitch
Rear PTO speeds declared—540 rpm—
Weight & dimensions
Unladen weight declared6,349 lb · 2,880 kg8,378 lb · 3,800 kg+32% D 9511
Wheelbase declared76.5 in · 1,943 mm80.2 in · 2,036 mm—
Length declared127.0 in · 3,226 mm136.0 in · 3,455 mm+7% D 9511
Width declared72.0 in · 1,829 mm70.1 in · 1,780 mm—
Ground clearance declared—10.2 in · 260 mm—
Fuel tank declared—95.1–100.4 qt · 90–95 L—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

J.I. Case 15-27 sources

Source
  • Source: Traktorenlexikon, “Case 15-27”

Lanz D 9511 sources

Source
  • Source: Traktorenlexikon, “Lanz D 9511”