5 material differences · fewer than 12
Tractor oneJ.I. Case 15-271919–1924No measured PTO figureTractor twoJohn Deere General Purpose1928–1935No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (49%); they were not built in overlapping years (1919–1924; 1928–1935). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
5 material differences · 0 fields identical or within 5%, which is not counted as material
| Field | 15-27 | General Purpose | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 27.1 hp | 24.9 hp | +9% 15-27 |
| Transmission | |||
| Top speed declared | 3.0 mph · 4.83 km/h | 4.3 mph · 7.0 km/h | +45% General Purpose |
| Clutch declared | Hand lever-operated twin-disc clutch | Hand operated dry John Deere single plate clutch | differs |
| Hydraulics & hitch | |||
| Rear PTO speeds declared | — | 520 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,349 lb · 2,880 kg | 4,266–4,925 lb · 1,935–2,234 kg | differs |
| Wheelbase declared | 76.5 in · 1,943 mm | — | — |
| Length declared | 127.0 in · 3,226 mm | 112.0 in · 2,845 mm | +13% 15-27 |
| Width declared | 72.0 in · 1,829 mm | 60.0 in · 1,524 mm | +20% 15-27 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
J.I. Case 15-27 sources
- Source: Traktorenlexikon, “Case 15-27”
John Deere General Purpose sources
- Source: Traktorenlexikon, “John Deere Modell GP”